dotfiles

lynx.cfg (162335B)

---

 # $LynxId: lynx.cfg,v 1.302 2018/07/08 15:22:44 tom Exp $
 # lynx.cfg file.
 # The default placement for this file is /usr/local/lib/lynx.cfg (Unix)
 #                                     or Lynx_Dir:lynx.cfg (VMS)
 #
 # $Format: "#PRCS LYNX_VERSION \"$ProjectVersion$\""$
 #PRCS LYNX_VERSION "2.8.9rel.1"
 #
 # $Format: "#PRCS LYNX_DATE \"$ProjectDate$\""$
 #PRCS LYNX_DATE "Sun, 08 Jul 2018 06:46:06 -0400"
 #
 # Definition pairs (configuration settings) are of the form
 #	VARIABLE:DEFINITION
 # NO spaces are allowed around the colon ":" between the pair items.
 #
 #  If you do not have write access to /usr/local/lib you may change
 #  the default location of this file in the userdefs.h file and recompile,
 #  or specify its location on the command line with the "-cfg"
 #  command line option.
 #
 # Items may be commented out by putting a '#' as the FIRST char of the line
 # (Any line beginning with punctuation is ignored).  Leading blanks on each
 # line are ignored; trailing blanks may be significant depending on the option.
 
 # In most cases, a definition can be overridden by another later in the
 # file, or in an including configuration file.  You can see the effect of
 # definitions (and redefinitions) in the trace file Lynx.log by using the
 # "-trace" and "-trace-mask" options, e.g.,
 #	lynx -trace -trace-mask=8
 
 # As a documentation aid, the default values for each setting are shown
 # commented-out.  By convention, these default value comments have no space
 # after the "#", e.g.,
 #	#HTTP_PROTOCOL:1.0
 
 # An HTML'ized description of all settings (based on comments in this file,
 # with alphabetical table of settings and with table of settings by category)
 # is available at https://lynx.invisible-island.net/release/breakout/lynx_help/cattoc.html
 #
 ### The conversion is done via the scripts/cfg2html.pl script.
 ### Several directives beginning with '.' are used for this purpose.
 
 .h1 Auxiliary Facilities
 # These settings control the auxiliary navigating facilities of lynx, e.g.,
 # jumpfiles, bookmarks, default URLs.
 
 .h2 INCLUDE
 # Starting with Lynx 2.8.1, the lynx.cfg file has a crude "include"
 # facility.  This means that you can take advantage of the global lynx.cfg
 # while also supplying your own tweaks.
 #
 # You can use a command-line argument (-cfg /where/is/lynx.cfg) or an
 # environment variable (LYNX_CFG=/where/is/lynx.cfg).
 # For instance, put in your .profile or .login:
 #
 #   LYNX_CFG=~/lynx.cfg; export LYNX_CFG   # in .profile for sh/ksh/bash/etc.
 #   setenv LYNX_CFG ~/lynx.cfg             # in .login for [t]csh
 #
 # Then in ~/lynx.cfg:
 #
 #   INCLUDE:/usr/local/lib/lynx.cfg
 #           ^^^^^^^^^^^^^^^^^^^^^^^ or whatever is appropriate on your system
 # and now your own tweaks.  If you omit the directory name, e.g.,
 #
 #   INCLUDE:lynx.cfg
 #
 # then lynx first checks if it is in any of the directories listed in the
 # environment variable LYNX_CFG_PATH, then tries the directory of the default
 # config-file.
 #
 # You can also suppress all but specific settings that will be read from
 # included files.  This allows sysadmins to provide users the ability to
 # customize lynx with options that normally do not affect security, such as
 # COLOR, VIEWER, KEYMAP.
 #
 # The syntax is
 #
 #   INCLUDE:filename for <space-separated-list-of-allowed-settings>
 #
 # sample:
 .ex
 #INCLUDE:~/lynx.cfg for COLOR VIEWER KEYMAP
 # only one space character should surround the word 'for'.  On Unix systems ':'
 # is also accepted as separator.  In that case, the example can be written as
 .ex
 #INCLUDE:~/lynx.cfg:COLOR VIEWER KEYMAP
 # In the example, only the settings COLOR, VIEWER and KEYMAP are accepted by
 # lynx.  Other settings are ignored.  Note:  INCLUDE is also treated as a
 # setting, so to allow an included file to include other files, put INCLUDE in
 # the list of allowed settings.
 #
 # If you allow an included file to include other files, and if a list of
 # allowed settings is specified for that file with the INCLUDE command, nested
 # files are only allowed to include the list of settings that is the set AND of
 # settings allowed for the included file and settings allowed by nested INCLUDE
 # commands.  In short, there is no security hole introduced by including a
 # user-defined configuration file if the original list of allowed settings is
 # secure.
 
 .h2 STARTFILE
 # STARTFILE is the default starting URL if none is specified
 #   on the command line or via a WWW_HOME environment variable;
 #   Lynx will refuse to start without a starting URL of some kind.
 # STARTFILE can be remote, e.g. http://www.w3.org/default.html ,
 #                or local, e.g. file://localhost/PATH_TO/FILENAME ,
 #           where PATH_TO is replaced with the complete path to FILENAME
 #           using Unix shell syntax and including the device on VMS.
 #
 # Normally we expect you will connect to a remote site, e.g., the Lynx starting
 # site:
 STARTFILE:https://www.openbsd.org/
 #
 # As an alternative, you may want to use a local URL.  A good choice for this is
 # the user's home directory:
 .ex
 #STARTFILE:file://localhost/~/
 #
 # Your choice of STARTFILE should reflect your site's needs, and be a URL that
 # you can connect to reliably.  Otherwise users will become confused and think
 # that they cannot run Lynx.
 
 .h2 HELPFILE
 # HELPFILE must be defined as a URL and must have a
 # complete path if local:
 # file://localhost/PATH_TO/lynx_help/lynx_help_main.html
 #   Replace PATH_TO with the path to the lynx_help subdirectory
 #   for this distribution (use SHELL syntax including the device
 #   on VMS systems).
 # The default HELPFILE is:
 .url https://lynx.invisible-island.net/lynx_help/lynx_help_main.html
 #   This should be changed to the local path.
 # This definition will be overridden if the "LYNX_HELPFILE" environment
 # variable has been set.
 #
 #HELPFILE:https://lynx.invisible-island.net/lynx_help/lynx_help_main.html
 .ex
 HELPFILE:file://localhost/usr/local/share/doc/lynx/lynx_help/lynx_help_main.html
 
 .h2 DEFAULT_INDEX_FILE
 # DEFAULT_INDEX_FILE is the default file retrieved when the
 # user presses the 'I' key when viewing any document.
 # An index to your CWIS can be placed here or a document containing
 # pointers to lots of interesting places on the web.
 #
 DEFAULT_INDEX_FILE:http://scout.wisc.edu/
 
 .h1 Interaction
 
 .h2 GOTOBUFFER
 # Set GOTOBUFFER to TRUE if you want to have the previous goto URL,
 # if any, offered for reuse or editing when using the 'g'oto command.
 # The default is defined in userdefs.h.  If left FALSE, the circular
 # buffer of previously entered goto URLs can still be invoked via the
 # Up-Arrow or Down-Arrow keys after entering the 'g'oto command.
 #
 #GOTOBUFFER:FALSE
 
 .h2 JUMP_PROMPT
 # JUMP_PROMPT is the default statusline prompt for selecting a jumps file
 # shortcut.  (see below).
 # You can change the prompt here from that defined in userdefs.h.  Any
 # trailing white space will be trimmed, and a single space is added by Lynx
 # following the last non-white character.  You must set the default prompt
 # before setting the default jumps file (below).  If a default jumps file
 # was set via userdefs.h, and you change the prompt here, you must set the
 # default jumps file again (below) for the change to be implemented.
 #
 #JUMP_PROMPT:Jump to (use '?' for list):
 
 .h1 Auxiliary Facilities
 
 .h2 JUMPFILE
 # JUMPFILE is the local file checked for short-cut names for URLs when
 # the user presses the 'j' (JUMP) key.  The file contains an HTML
 # definition list (DL).  The definition titles (DT) are used as
 # short-cut name; the definition data (DD) are URLs.
 #
 # There is an example jumps file in the samples subdirectory.
 #
 # After pressing 'j', the user will be prompted to enter a short-cut
 # name for an URL, which Lynx will then follow in a similar manner to
 # 'g'oto; alternatively, s/he can enter '?' to view the full JUMPFILE
 # list of short-cuts with associated URLs.
 #
 # If the URL contains one or more "%s" markers, Lynx will prompt the user
 # for text to fill in for each marker.  If no text is given, the jump is
 # cancelled.
 #
 # If not defined here or in userdefs.h, the JUMP command will invoke the
 # NO_JUMPFILE statusline message (see LYMessages_en.h ).
 #
 # To allow '?' to work, include in the JUMPFILE
 # a short-cut to the JUMPFILE itself, e.g.
 # <dt>?<dd><a href="file://localhost/path/jumps.html">This Shortcut List</a>
 #
 # On VMS, use Unix SHELL syntax (including a lead slash) to define it.
 #
 # Alternate jumps files can be defined and mapped to keys here.  If the
 # keys have already been mapped, then those mappings will be replaced,
 # but you should leave at least one key mapped to the default jumps
 # file.  You optionally may include a statusline prompt string for the
 # mapping.  You must map upper and lowercase keys separately (beware of
 # mappings to keys which the user can further remap via the 'o'ptions
 # menu).  The format is:
 #
 #	JUMPFILE:path:key[:prompt]
 #
 # where path should begin with a '/' (i.e., not include file://localhost).
 # Any white space following a prompt string will be trimmed, and a single
 # space will be added by Lynx.
 #
 # In the following line, include the actual full local path to JUMPFILE,
 # but do not include 'file://localhost' in the line.
 #JUMPFILE:/FULL_LOCAL_PATH/jumps.html
 .ex
 #JUMPFILE:/Lynx_Dir/ips.html:i:IP or Interest group (? for list):
 
 .h2 JUMPBUFFER
 # Set JUMPBUFFER to TRUE if you want to have the previous jump target,
 # if any, offered for reuse or editing when using the 'J'ump command.
 # The default is defined in userdefs.h.  If left FALSE, the circular
 # buffer of previously entered targets (shortcuts) can still be invoked
 # via the Up-Arrow or Down-Arrow keys after entering the 'J'ump command.
 # If multiple jumps files are installed, the recalls of shortcuts will
 # be specific to each file.  If Lynx was built with PERMIT_GOTO_FROM_JUMP
 # defined, any random URLs used instead of shortcuts will be stored in the
 # goto URL buffer, not in the shortcuts buffer(s), and the single character
 # ':' can be used as a target to invoke the goto URL buffer (as if 'g'oto
 # followed by Up-Arrow had been entered).
 #
 #JUMPBUFFER:FALSE
 
 .h1 Internal Behavior
 
 .h2 SAVE_SPACE
 # If SAVE_SPACE is defined, it will be used as a path prefix for the
 # suggested filename in "Save to Disk" operations from the 'p'rint or
 # 'd'ownload menus.  On VMS, you can use either VMS (e.g., "SYS$LOGIN:")
 # or Unix syntax (including '~' for the HOME directory).  On Unix, you
 # must use Unix syntax.  If the symbol is not defined, or is zero-length
 # (""), no prefix will be used, and only a filename for saving in the
 # current default directory will be suggested.
 # This definition will be overridden if a "LYNX_SAVE_SPACE" environment
 # variable has been set on Unix, or logical has been defined on VMS.
 #
 #SAVE_SPACE:~/foo/
 
 .h2 REUSE_TEMPFILES
 # Lynx uses temporary files for (among other purposes) the content of
 # various user interface pages.  REUSE_TEMPFILES changes the behavior
 # for some of these temp files, among them pages shown for HISTORY,
 # VLINKS, OPTIONS, INFO, PRINT, DOWNLOAD commands.
 # If set to TRUE, the same file can be used multiple times for the same
 # purpose.  If set to FALSE, a new filename is generated each time before
 # rewriting such a page.  With TRUE, repeated invocation of these commands
 # is less likely to push previous documents out of the cache of rendered
 # texts (see also DEFAULT_CACHE_SIZE).  This is especially useful with
 # intermittent (dialup) network connections, when it is desirable to
 # continue browsing through the cached documents after disconnecting.
 # With the default setting of FALSE, there can be more than one incarnation
 # of e.g. the VLINKS page cached in memory (but still only the most recently
 # generated one is kept as a file), resulting in sometimes less surprising
 # behaviour when returning to such a page via HISTORY or PREV_DOC functions
 # (most users will not encounter and notice this difference).
 #
 #REUSE_TEMPFILES:FALSE
 
 .h2 LYNX_HOST_NAME
 # If LYNX_HOST_NAME is defined here or in userdefs.h, it will be
 # treated as an alias for the local host name in checks for URLs on
 # the local host (e.g., when the -localhost switch is set), and this
 # host name, "localhost", and HTHostName (the fully qualified domain
 # name of the system on which Lynx is running) will all be passed as
 # local.  A different definition here will override that in userdefs.h.
 #
 #LYNX_HOST_NAME:www.cc.ukans.edu
 
 .h2 LOCALHOST_ALIAS
 # localhost aliases
 # Any LOCALHOST_ALIAS definitions also will be accepted as local when
 # the -localhost switch is set.  These need not actually be local, i.e.,
 # in contrast to LYNX_HOST_NAME, you can define them to trusted hosts at
 # other Internet sites.
 #
 .ex 2
 #LOCALHOST_ALIAS:gopher.server.domain
 #LOCALHOST_ALIAS:news.server.domain
 
 .h2 LOCAL_DOMAIN
 # LOCAL_DOMAIN is used for a tail match with the ut_host element of
 # the utmp or utmpx structure on systems with utmp capabilities, to
 # determine if a user is local to your campus or organization when
 # handling -restrictions=inside_foo or outside_foo settings for ftp,
 # news, telnet/tn3270 and rlogin URLs.  An "inside" user is assumed
 # if your system does not have utmp capabilities.  CHANGE THIS here
 # if it was not changed in userdefs.h at compilation time.
 #
 #LOCAL_DOMAIN:ukans.edu
 
 .h1 Session support
 
 .h2 AUTO_SESSION
 # If AUTO_SESSION is TRUE lynx will save/restore useful information about
 # your browsing history when closing/starting current lynx session if
 # no command-line session switches override this setting.
 # This setting is useful only if SESSION_FILE is defined here or in the user's
 # .lynxrc file.
 #
 #AUTO_SESSION:FALSE
 
 .h2 SESSION_FILE
 # SESSION_FILE defines the file name where lynx will store user sessions.
 # This setting is used only when AUTO_SESSION is true.
 # Note: the default setting will store/resume each session in a different
 # folder under same file name (if that is allowed by operating system)
 # when lynx is invoked from different directories.
 # (The current working directory may be changed inside lynx)
 #
 # If you want to use the same session file wherever you invoke Lynx,
 # enter the full path below, eg '/home/<username>/.lynx_session'.
 #
 # If you do not want this feature, leave the setting commented.
 # Users can still customize SESSION_FILE and AUTO_SESSION via
 # their .lynxrc file.
 #
 #SESSION_FILE:lynx_session
 
 .h2 SESSION_LIMIT
 # SESSION_LIMIT defines maximum number of:  searched strings, goto URLs,
 # visited links and history entries which will be saved in session file.  The
 # minimum allowed is 1, the maximum is 10000.
 #
 # For instance, if SESSION_LIMIT is 250, a per-session limit of 250 entries of
 # searched strings, goto URLs, visited links and history entries will be saved
 # in the session file.
 #
 # There is no fixed limit on the number of entries which can be restored;
 # It is limited only by available memory.
 #
 #SESSION_LIMIT:250
 
 .h1 Character Sets
 
 .h2 CHARACTER_SET
 # CHARACTER_SET defines the display character set, i.e., assumed to be
 # installed on the user's terminal.  It determines which characters or strings
 # will be used to represent 8-bit character entities within HTML.  New
 # character sets may be defined as explained in the README files of the
 # src/chrtrans directory in the Lynx source code distribution.  For Asian (CJK)
 # character sets, it also determines how Kanji code will be handled.  The
 # default is defined in userdefs.h and can be changed here or via the
 # 'o'ptions menu.  The 'o'ptions menu setting will be stored in the user's RC
 # file whenever those settings are saved, and thereafter will be used as the
 # default.  For Lynx a "character set" has two names:  a MIME name (for
 # recognizing properly labeled charset parameters in HTTP headers etc.), and a
 # human-readable string for the 'O'ptions Menu (so you may find info about
 # language or group of languages besides MIME name).  Not all 'human-readable'
 # names correspond to exactly one valid MIME charset (example is "Chinese");
 # in that case an appropriate valid (and more specific) MIME name should be
 # used where required.  Well-known synonyms are also processed in the code.
 #
 # Raw (CJK) mode
 #
 # Lynx normally translates characters from a document's charset to display
 # charset, using ASSUME_CHARSET value (see below) if the document's charset
 # is not specified explicitly.  Raw (CJK) mode is OFF for this case.
 # When the document charset is specified explicitly, that charset
 # overrides any assumption like ASSUME_CHARSET or raw (CJK) mode.
 #
 # For the Asian (CJK) display character sets, the corresponding charset is
 # assumed in documents, i.e., raw (CJK) mode is ON by default.  In raw CJK
 # mode, 8-bit characters are not reverse translated in relation to the entity
 # conversion arrays, i.e., they are assumed to be appropriate for the display
 # character set.  The mode should be toggled OFF when an Asian (CJK) display
 # character set is selected but the document is not CJK and its charset not
 # specified explicitly.
 #
 # Raw (CJK) mode may be toggled by user via '@' (LYK_RAW_TOGGLE) key,
 # the -raw command line switch or from the 'o'ptions menu.
 #
 # Raw (CJK) mode effectively changes the charset assumption about unlabeled
 # documents.  You can toggle raw mode ON if you believe the document has a
 # charset which does correspond to your Display Character Set.  On the other
 # hand, if you set ASSUME_CHARSET the same as Display Character Set you get raw
 # mode ON by default (but you get assume_charset=iso-8859-1 if you try raw mode
 # OFF after it).
 #
 # Note that "raw" does not mean that every byte will be passed to the screen.
 # HTML character entities may get expanded and translated, inappropriate
 # control characters filtered out, etc.  There is a "Transparent" pseudo
 # character set for more "rawness".
 #
 # Since Lynx now supports a wide range of platforms it may be useful to note
 # the cpXXX codepages used by IBM PC compatible computers, and windows-xxxx
 # used by native MS-Windows apps.  We also note that cpXXX pages rarely are
 # found on Internet, but are mostly for local needs on DOS.
 #
 # Recognized character sets include:
 #
 .nf
 #    string for 'O'ptions Menu          MIME name
 #    ===========================        =========
 #    7 bit approximations (US-ASCII)    us-ascii
 #    Western (ISO-8859-1)               iso-8859-1
 #    Western (ISO-8859-15)              iso-8859-15
 #    Western (cp850)                    cp850
 #    Western (windows-1252)             windows-1252
 #    IBM PC US codepage (cp437)         cp437
 #    DEC Multinational                  dec-mcs
 #    Macintosh (8 bit)                  macintosh
 #    NeXT character set                 next
 #    HP Roman8                          hp-roman8
 #    Chinese                            euc-cn
 #    Japanese (EUC-JP)                  euc-jp
 #    Japanese (Shift_JIS)               shift_jis
 #    Korean                             euc-kr
 #    Taipei (Big5)                      big5
 #    Vietnamese (VISCII)                viscii
 #    Eastern European (ISO-8859-2)      iso-8859-2
 #    Eastern European (cp852)           cp852
 #    Eastern European (windows-1250)    windows-1250
 #    Latin 3 (ISO-8859-3)               iso-8859-3
 #    Latin 4 (ISO-8859-4)               iso-8859-4
 #    Baltic Rim (ISO-8859-13)		iso-8859-13
 #    Baltic Rim (cp775)                 cp775
 #    Baltic Rim (windows-1257)          windows-1257
 #    Celtic (ISO-8859-14)		iso-8859-14
 #    Cyrillic (ISO-8859-5)              iso-8859-5
 #    Cyrillic (cp866)                   cp866
 #    Cyrillic (windows-1251)            windows-1251
 #    Cyrillic (KOI8-R)                  koi8-r
 #    Arabic (ISO-8859-6)                iso-8859-6
 #    Arabic (cp864)                     cp864
 #    Arabic (windows-1256)              windows-1256
 #    Greek (ISO-8859-7)                 iso-8859-7
 #    Greek (cp737)                      cp737
 #    Greek2 (cp869)                     cp869
 #    Greek (windows-1253)               windows-1253
 #    Hebrew (ISO-8859-8)                iso-8859-8
 #    Hebrew (cp862)                     cp862
 #    Hebrew (windows-1255)              windows-1255
 #    Turkish (ISO-8859-9)               iso-8859-9
 #    North European (ISO-8859-10)	iso-8859-10
 #    Ukrainian Cyrillic (cp866u)        cp866u
 #    Ukrainian Cyrillic (KOI8-U)        koi8-u
 #    UNICODE (UTF-8)                    utf-8
 #    RFC 1345 w/o Intro                 mnemonic+ascii+0
 #    RFC 1345 Mnemonic                  mnemonic
 #    Transparent                        x-transparent
 .fi
 #
 # The value should be the MIME name of a character set recognized by
 # Lynx (case insensitive).
 # Find RFC 1345 at
 .url http://tools.ietf.org/html/rfc1345
 #
 #CHARACTER_SET:iso-8859-1
 
 .h2 LOCALE_CHARSET
 # LOCALE_CHARSET overrides CHARACTER_SET if true, using the current locale to
 # lookup a MIME name that corresponds, and use that as the display charset.
 #
 # It also modifies the default value for ASSUME_CHARSET; it does not override
 # that setting.
 #
 # Note that while nl_langinfo(CODESET) itself is standardized, the return
 # values and their relationship to the locale value is not.  GNU libiconv
 # happens to give useful values, but other implementations are not guaranteed
 # to do this.
 #LOCALE_CHARSET:FALSE
 
 .h2 HTML5_CHARSETS
 # HTML5_CHARSETS is an alternative to ASSUME_CHARSET and ASSUME_LOCAL_CHARSET.
 # Those assume by default that the character set of an HTML document is (as is
 # standard in HTML4) ISO-8859-1, in the absence of locale information.
 #
 # HTML5 introduces a "compatibility" (sic) feature which assumes that the
 # default is Windows 1252.  In the same way, it equates ISO-8859-4 and Windows
 # 1254.  Finally, it also makes recommendations which selectively reinterpret
 # the locale encoding.
 #
 # This option currently implements only the equating of ISO-8859-1 and Windows
 # 1252.
 #
 #HTML5_CHARSETS:FALSE
 
 .h2 ASSUME_CHARSET
 # ASSUME_CHARSET changes the handling of documents which do not
 # explicitly specify a charset.  Normally Lynx assumes that 8-bit
 # characters in those documents are encoded according to iso-8859-1
 # (the official default for the HTTP protocol).  When ASSUME_CHARSET
 # is defined here or by an -assume_charset command line flag is in effect,
 # Lynx will treat documents as if they were encoded accordingly.
 # See above on how this interacts with "raw mode" and the Display
 # Character Set.
 # ASSUME_CHARSET can also be changed via the 'o'ptions menu but will
 # not be saved as permanent value in user's .lynxrc file to avoid more chaos.
 #
 #ASSUME_CHARSET:iso-8859-1
 
 .h2 ASSUMED_DOC_CHARSET_CHOICE
 .h2 DISPLAY_CHARSET_CHOICE
 # It is possible to reduce the number of charset choices in the 'O'ptions menu
 # for "display charset" and "assumed document charset" fields via
 # DISPLAY_CHARSET_CHOICE and ASSUMED_DOC_CHARSET_CHOICE settings correspondingly.
 # Each of these settings can be used several times to define the set of possible
 # choices for corresponding field. The syntax for the values is
 #
 #	string | prefix* | *
 #
 # where
 #
 #	'string' is either the MIME name of charset or it's full name (listed
 #		either in the left or in the right column of table of
 #		recognized charsets), case-insensitive - e.g.  'Koi8-R' or
 #		'Cyrillic (KOI8-R)' (both without quotes),
 #
 #	'prefix' is any string, and such value will select all charsets having
 #		the name with prefix matching given (case insensitive), i.e.,
 #		for the charsets listed in the table of recognized charsets,
 #
 .ex
 # ASSUMED_DOC_CHARSET_CHOICE:cyrillic*
 #		will be equal to specifying
 .ex 4
 # ASSUMED_DOC_CHARSET_CHOICE:cp866
 # ASSUMED_DOC_CHARSET_CHOICE:windows-1251
 # ASSUMED_DOC_CHARSET_CHOICE:koi8-r
 # ASSUMED_DOC_CHARSET_CHOICE:iso-8859-5
 #		or lines with full names of charsets.
 #
 #	literal string '*' (without quotes) will enable all charset choices
 #		in corresponding field.  This is useful for overriding site
 #		defaults in private pieces of lynx.cfg included via INCLUDE
 #		directive.
 #
 # Default values for both settings are '*', but any occurrence of settings
 # with values that denote any charsets will make only listed choices available
 # for corresponding field.
 #ASSUMED_DOC_CHARSET_CHOICE:*
 #DISPLAY_CHARSET_CHOICE:*
 
 .h2 ASSUME_LOCAL_CHARSET
 # ASSUME_LOCAL_CHARSET is like ASSUME_CHARSET but only applies to local
 # files.  If no setting is given here or by an -assume_local_charset
 # command line option, the value for ASSUME_CHARSET or -assume_charset
 # is used.  It works for both text/plain and text/html files.
 # This option will ignore "raw mode" toggling when local files are viewed
 # (it is "stronger" than "assume_charset" or the effective change
 # of the charset assumption caused by changing "raw mode"),
 # so only use when necessary.
 #
 #ASSUME_LOCAL_CHARSET:iso-8859-1
 
 .h2 PREPEND_CHARSET_TO_SOURCE
 # PREPEND_CHARSET_TO_SOURCE:TRUE tells Lynx to prepend a META CHARSET line
 # to text/html source files when they are retrieved for 'd'ownloading
 # or passed to 'p'rint functions, so HTTP headers will not be lost.
 # This is necessary for resolving charset for local html files,
 # while the assume_local_charset is just an assumption.
 # For the 'd'ownload option, a META CHARSET will be added only if the HTTP
 # charset is present.  The compilation default is TRUE.
 # It is generally desirable to have charset information for every local
 # html file, but META CHARSET string potentially could cause
 # compatibility problems with other browsers, see also PREPEND_BASE_TO_SOURCE.
 # Note that the prepending is not done for -source dumps.
 #
 #PREPEND_CHARSET_TO_SOURCE:TRUE
 
 .h2 NCR_IN_BOOKMARKS
 # NCR_IN_BOOKMARKS:TRUE allows you to save 8-bit characters in bookmark titles
 # in the unicode format (NCR).  This may be useful if you need to switch
 # display charsets frequently.  This is the case when you use Lynx on different
 # platforms, e.g., on UNIX and from a remote PC, and want to keep the bookmarks
 # file persistent.
 # Another aspect is compatibility:  NCR is part of I18N and HTML4.0
 # specifications supported starting with Lynx 2.7.2, Netscape 4.0 and MSIE 4.0.
 # Older browser versions will fail so keep NCR_IN_BOOKMARKS:FALSE if you
 # plan to use them.
 #
 #NCR_IN_BOOKMARKS:FALSE
 
 .h2 FORCE_8BIT_TOUPPER
 # FORCE_8BIT_TOUPPER overrides locale settings and uses internal 8-bit
 # case-conversion mechanism for case-insensitive searches in non-ASCII display
 # character sets.  It is FALSE by default and should not be changed unless
 # you encounter problems with case-insensitive searches.
 #
 #FORCE_8BIT_TOUPPER:FALSE
 
 .h2 OUTGOING_MAIL_CHARSET
 # While Lynx supports different platforms and display character sets
 # we need to limit the charset in outgoing mail to reduce
 # trouble for remote recipients who may not recognize our charset.
 # You may try US-ASCII as the safest value (7 bit), any other MIME name,
 # or leave this field blank (default) to use the display character set.
 # Charset translations currently are implemented for mail "subjects= " only.
 #
 #OUTGOING_MAIL_CHARSET:
 
 .h2 ASSUME_UNREC_CHARSET
 # If Lynx encounters a charset parameter it doesn't recognize, it will
 # replace the value given by ASSUME_UNREC_CHARSET (or a corresponding
 # -assume_unrec_charset command line option) for it.  This can be used
 # to deal with charsets unknown to Lynx, if they are "sufficiently
 # similar" to one that Lynx does know about, by forcing the same
 # treatment.  There is no default, and you probably should leave this
 # undefined unless necessary.
 #
 #ASSUME_UNREC_CHARSET:iso-8859-1
 
 .h2 PREFERRED_LANGUAGE
 # PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en",
 # "fr") which will be indicated by Lynx in its Accept-Language headers
 # as the preferred language.  If available, the document will be
 # transmitted in that language.  Users can override this setting via
 # the 'o'ptions menu and save that preference in their RC file.
 # This may be a comma-separated list of languages in decreasing preference.
 #
 #PREFERRED_LANGUAGE:en
 
 .h2 PREFERRED_CHARSET
 # PREFERRED_CHARSET specifies the character set in MIME notation (e.g.,
 # "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in
 # requests to http servers using an Accept-Charsets header.  Users can
 # change it via the 'o'ptions menu and save that preference in their RC file.
 # The value should NOT include "ISO-8859-1" or "US-ASCII",
 # since those values are always assumed by default.
 # If a file in that character set is available, the server will send it.
 # If no Accept-Charset header is present, the default is that any
 # character set is acceptable.  If an Accept-Charset header is present,
 # and if the server cannot send a response which is acceptable
 # according to the Accept-Charset header, then the server SHOULD send
 # an error response with the 406 (not acceptable) status code, though
 # the sending of an unacceptable response is also allowed.  See RFC 2068
 .url http://tools.ietf.org/html/rfc2068
 #
 #PREFERRED_CHARSET:
 
 .h2 CHARSETS_DIRECTORY
 # CHARSETS_DIRECTORY specifies the directory with the fonts (glyph data)
 # used by Lynx to switch the display-font to a font best suited for the
 # given document.  The font should be in a format understood by the
 # platforms TTY-display-font-switching API.  Currently supported on OS/2 only.
 #
 # Lynx expects the glyphs for the charset CHARSET with character cell
 # size HHHxWWW to be stored in a file HHHxWWW/CHARSET.fnt inside the directory
 # specified by CHARSETS_DIRECTORY.  E.g., the font for koi8-r sized 14x9
 # should be in the file 14x9/koi8-r.fnt.
 #
 #CHARSETS_DIRECTORY:
 
 .h2 CHARSET_SWITCH_RULES
 # CHARSET_SWITCH_RULES hints lynx on how to choose the best display font given
 # the document encoding.  This string is a sequence of chunks, each chunk
 # having the following form:
 #
 # IN_CHARSET1 IN_CHARSET2 ... IN_CHARSET5 :OUT_CHARSET
 #
 # For readability, one may insert arbitrary additional punctuation (anything
 # but : is ignored).  E.g., if lynx is able to switch only to display charsets
 # cp866, cp850, cp852, and cp862, then the following setting may be useful
 # (split for readability):
 #
 # CHARSET_SWITCH_RULES: koi8-r ISO-8859-5 windows-1251 cp866u KOI8-U :cp866,
 #	iso-8859-1 windows-1252 ISO-8859-15 :cp850,
 #	ISO-8859-2 windows-1250 :cp852,
 #	ISO-8859-8 windows-1255 :cp862
 #
 #CHARSET_SWITCH_RULES:
 
 .h1 Interaction
 
 .h2 URL_DOMAIN_PREFIXES
 .h2 URL_DOMAIN_SUFFIXES
 # URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be
 # prepended (together with a scheme://) and appended to the first element
 # of command line or 'g'oto arguments which are not complete URLs and
 # cannot be opened as a local file (file://localhost/string).  Both
 # can be comma-separated lists.  Each prefix must end with a dot, each
 # suffix must begin with a dot, and either may contain other dots (e.g.,
 # .com.jp).  The default lists are defined in userdefs.h and can be
 # replaced here.  Each prefix will be used with each suffix, in order,
 # until a valid Internet host is created, based on a successful DNS
 # lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu
 # etc.).  The first element can include a :port and/or /path which will
 # be restored with the expanded host (e.g., wfbr:8002/dir/lynx will
 # become http://www.wfbr.edu:8002/dir/lynx).  The prefixes will not be
 # used if the first element ends in a dot (or has a dot before the
 # :port or /path), and similarly the suffixes will not be used if the
 # the first element begins with a dot (e.g., .nyu.edu will become
 # http://www.nyu.edu without testing www.nyu.com).  Lynx will try to
 # guess the scheme based on the first field of the expanded host name,
 # and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr.
 # will be made gopher://gopher.wfbr.edu).
 #
 #URL_DOMAIN_PREFIXES:www.
 #URL_DOMAIN_SUFFIXES:.com,.edu,.net,.org
 
 .h2 FORMS_OPTIONS
 # Toggle whether the Options Menu is key-based or form-based;
 # the key-based version is available only if specified at compile time.
 #FORMS_OPTIONS:TRUE
 
 .h2 PARTIAL
 # Display partial pages while downloading
 #PARTIAL:TRUE
 
 .h2 PARTIAL_THRES
 # Set the threshold # of lines Lynx must render before it
 # redraws the screen in PARTIAL mode.  Anything < 0 implies
 # use of the screen size.
 #PARTIAL_THRES:-1
 
 .h2 SHOW_KB_RATE
 # While getting large files, Lynx shows the approximate rate of transfer.
 # Set this to change the units shown.  "Kilobytes" denotes 1024 bytes:
 #	NONE to disable the display of transfer rate altogether.
 #	TRUE or KB for Kilobytes/second.
 #	FALSE or BYTES for bytes/second.
 #	KB,ETA to show Kilobytes/second with estimated completion time.
 #	BYTES,ETA to show BYTES/second with estimated completion time.
 #	KB2,ETA to show Kilobytes/second with estimated completion time using 2-digits.
 #	BYTES2,ETA to show BYTES/second with estimated completion time using 2-digits.
 # Note that the "ETA" values are available if USE_READPROGRESS was defined.
 #SHOW_KB_RATE:TRUE
 
 .h2 SHOW_KB_NAME
 # Set the abbreviation for Kilobytes (1024).
 # Quoting from
 .url http://www.romulus2.com/articles/guides/misc/bitsbytes.shtml
 # In December 1998, the International Electrotechnical Commission (IEC)
 # approved a new IEC International Standard.  Instead of using the metric
 # prefixes for multiples in binary code, the new IEC standard invented specific
 # prefixes for binary multiples made up of only the first two letters of the
 # metric prefixes and adding the first two letters of the word "binary".  Thus,
 # for instance, instead of Kilobyte (KB) or Gigabyte (GB), the new terms would
 # be kibibyte (KiB) or gibibyte (GiB).
 #
 # If you prefer using the conventional (and more common) "KB", modify this
 # setting.
 #SHOW_KB_NAME:KiB
 
 .h1 Timeouts
 
 .h2 INFOSECS
 .h2 MESSAGESECS
 .h2 ALERTSECS
 .h2 NO_PAUSE
 # The following definitions set the number of seconds for
 # pauses following statusline messages that would otherwise be
 # replaced immediately, and are more important than the unpaused
 # progress messages.  Those set by INFOSECS are also basically
 # progress messages (e.g., that a prompted input has been canceled)
 # and should have the shortest pause.  Those set by MESSAGESECS are
 # informational (e.g., that a function is disabled) and should have
 # a pause of intermediate duration.  Those set by ALERTSECS typically
 # report a serious problem and should be paused long enough to read
 # whenever they appear (typically unexpectedly).  The default values
 # are defined in userdefs.h, and can be modified here should longer
 # pauses be desired for braille-based access to Lynx.
 #
 # SVr4-curses implementations support time delays in milliseconds,
 # hence the value may be given shorter, e.g., 0.5
 #
 # Use the NO_PAUSE option (like the command-line -nopause) to override
 # all of the delay times.
 #
 #INFOSECS:1
 #MESSAGESECS:2
 #ALERTSECS:3
 #NO_PAUSE:FALSE
 
 .h2 DEBUGSECS
 # Set DEBUGSECS to a nonzero value to slow down progress messages
 # (see "-delay" option).
 #DEBUGSECS:0
 
 .h2 REPLAYSECS
 # Set REPLAYSECS to a nonzero value to allow for slow replaying of
 # command scripts (see "-cmd_script" option).
 #REPLAYSECS:0
 
 .h1 Appearance
 # These settings control the appearance of Lynx's screen and the way
 # Lynx renders some tags.
 
 .h2 USE_SELECT_POPUPS
 # If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list of
 # radio buttons for the OPTIONs in SELECT blocks which lack the MULTIPLE
 # attribute, instead of using a popup menu.  Note that if the MULTIPLE
 # attribute is present in the SELECT start tag, Lynx always will create a
 # vertical list of checkboxes for the OPTIONs.
 # The default defined here or in userdefs.h can be changed via the 'o'ptions
 # menu and saved in the RC file, and always can be toggled via the -popup
 # command line switch.
 #
 #USE_SELECT_POPUPS:TRUE
 
 .h2 SHOW_CURSOR
 # SHOW_CURSOR controls whether or not the cursor is hidden or appears
 # over the current link in documents or the current option in popups.
 # Showing the cursor is handy if you are a sighted user with a poor
 # terminal that can't do bold and reverse video at the same time or
 # at all.  It also can be useful to blind users, as an alternative
 # or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or
 # LINKS_ARE_NUMBERED.
 # The default defined here or in userdefs.h can be changed via the
 # 'o'ptions menu and saved in the RC file, and always can be toggled
 # via the -show_cursor command line switch.
 #
 #SHOW_CURSOR:FALSE
 
 .h2 UNDERLINE_LINKS
 # UNDERLINE_LINKS controls whether links are underlined by default, or shown
 # in bold.  Normally this default is set from the configure script.
 #
 #UNDERLINE_LINKS:FALSE
 
 .h2 BOLD_HEADERS
 # If BOLD_HEADERS is set to TRUE the HT_BOLD default style will be acted
 # upon for <H1> through <H6> headers.  The compilation default is FALSE
 # (only the indentation styles are acted upon, but see BOLD_H1, below).
 # On Unix, compilation with -DUNDERLINE_LINKS also will apply to the
 # HT_BOLD style for headers when BOLD_HEADERS is TRUE.
 #
 #BOLD_HEADERS:FALSE
 
 .h2 BOLD_H1
 # If BOLD_H1 is set to TRUE the HT_BOLD default style will be acted
 # upon for <H1> headers even if BOLD_HEADERS is FALSE.  The compilation
 # default is FALSE.  On Unix, compilation with -DUNDERLINE_LINKS also
 # will apply to the HT_BOLD style for headers when BOLD_H1 is TRUE.
 #
 #BOLD_H1:FALSE
 
 .h2 BOLD_NAME_ANCHORS
 # If BOLD_NAME_ANCHORS is set to TRUE the content of anchors without
 # an HREF attribute, (i.e., anchors with a NAME or ID attribute) will
 # have the HT_BOLD default style.  The compilation default is FALSE.
 # On Unix, compilation with -DUNDERLINE_LINKS also will apply to the
 # HT_BOLD style for NAME (ID) anchors when BOLD_NAME_ANCHORS is TRUE.
 #
 #BOLD_NAME_ANCHORS:FALSE
 
 .h1 Internal Behavior
 
 .h2 DEFAULT_CACHE_SIZE
 .h2 DEFAULT_VIRTUAL_MEMORY_SIZE
 # The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be
 # cached in memory at one time.
 #
 # This so-called cache size (actually, number) is defined in userdefs.h and
 # may be modified here and/or with the command line argument -cache=NUMBER
 # The minimum allowed value is 2, for the current document and at least one
 # to fetch, and there is no absolute maximum number of cached documents.
 # On Unix, and VMS not compiled with VAXC, whenever the number is exceeded
 # the least recently displayed document will be removed from memory.
 #
 # On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the
 # amount (bytes) of virtual memory that can be allocated and not yet be freed
 # before previous documents are removed from memory.  If the values for both
 # the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then
 # the least recently displayed documents will be freed until one or the other
 # value is no longer exceeded.  The default value is defined in userdefs.h.
 #
 # The Unix and VMS (but not VAXC) implementations use the C library malloc's
 # and calloc's for memory allocation, but procedures for taking the actual
 # amount of cache into account still need to be developed.  They use only
 # the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum
 # number of documents to cache (rather than the maximum number only if
 # DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX).
 #
 #DEFAULT_CACHE_SIZE:10
 #DEFAULT_VIRTUAL_MEMORY_SIZE:512000
 
 .h2 SOURCE_CACHE
 # SOURCE_CACHE sets the source caching behavior for Lynx:
 #
 # FILE causes Lynx to keep a temporary file for each cached document
 #   containing the HTML source of the document, which it uses to regenerate
 #   the document when certain settings are changed (for instance,
 #   historical vs. minimal vs. valid comment parsing) instead of reloading
 #   the source from the network.
 #
 # MEMORY is like FILE, except the document source is kept in memory.  You
 #   may wish to adjust DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE
 #   accordingly.
 #
 # NONE is the default; the document source is not cached, and is reloaded
 #   from the network when needed.
 #
 #SOURCE_CACHE:NONE
 
 .h2 SOURCE_CACHE_FOR_ABORTED
 # This setting controls what will happen with cached source for the document
 # being fetched from the net if fetching was aborted (either user pressed
 # 'z' or network went down). If set to KEEP, the source fetched so far will
 # be preserved (and used as cache), if set to DROP lynx will drop the
 # source cache for that document (i.e. only completely downloaded documents
 # will be cached in that case).
 #SOURCE_CACHE_FOR_ABORTED:DROP
 
 .h2 ALWAYS_RESUBMIT_POSTS
 # If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms
 # with method POST, dumping any cache from a previous submission of the
 # form, including when the document returned by that form is sought with
 # the PREV_DOC command or via the history list.  Lynx always resubmits
 # forms with method POST when a submit button or a submitting text input
 # is activated, but normally retrieves the previously returned document
 # if it had links which you activated, and then go back with the PREV_DOC
 # command or via the history list.
 #
 # The default defined here or in userdefs.h can be toggled via
 # the -resubmit_forms command line switch.
 #
 #ALWAYS_RESUBMIT_POSTS:FALSE
 
 .h2 TRIM_INPUT_FIELDS
 # If TRIM_INPUT_FIELDS is set TRUE, Lynx will trim trailing whitespace (e.g.,
 # space, tab, carriage return, line feed and form feed) from the text entered
 # into form text and textarea fields.  Older versions of Lynx do this trimming
 # unconditionally, but other browsers do not, which would yield different
 # behavior for CGI scripts.
 #TRIM_INPUT_FIELDS:FALSE
 
 .h1 HTML Parsing
 
 .h2 NO_ISMAP_IF_USEMAP
 # If NO_ISMAP_IF_USEMAP is set TRUE, Lynx will not include a link to the
 # server-side image map if both a server-side and client-side map for the
 # same image is indicated in the HTML markup.  The compilation default is
 # FALSE, such that a link with "[ISMAP]" as the link name, followed by a
 # hyphen, will be prepended to the ALT string or "[USEMAP]" pseudo-ALT for
 # accessing Lynx's text-based rendition of the client-side map (based on
 # the content of the associated MAP element).  If the "[ISMAP]" link is
 # activated, Lynx will send a 0,0 coordinate pair to the server, which
 # Lynx-friendly sites can map to a for-text-client document, homologous
 # to what is intended for the content of a FIG element.
 #
 # The compilation default, or default defined here, can be toggled via
 # the "-ismap" command line switch.
 #
 #NO_ISMAP_IF_USEMAP:FALSE
 
 .h2 SEEK_FRAG_MAP_IN_CUR
 # If SEEK_FRAG_MAP_IN_CUR is set FALSE, then USEMAP attribute values
 # (in IMG or OBJECT tags) consisting of only a fragment (USEMAP="#foo")
 # will be resolved with respect to the current document's base, which
 # might not be the same as the current document's URL.
 # The compilation default is to use the current document's URL in all
 # cases (i.e., assume the MAP is present below, if it wasn't present
 # above the point in the HTML stream where the USEMAP attribute was
 # detected).  Lynx's present "single pass" rendering engine precludes
 # checking below before making the decision on how to resolve a USEMAP
 # reference consisting solely of a fragment.
 #
 #SEEK_FRAG_MAP_IN_CUR:TRUE
 
 .h2 SEEK_FRAG_AREA_IN_CUR
 # If SEEK_FRAG_AREA_IN_CUR is set FALSE, then HREF attribute values
 # in AREA tags consisting of only a fragment (HREF="#foo") will be
 # resolved with respect to the current document's base, which might
 # not be the same as the current document's URL.  The compilation
 # default is to use the current document's URL, as is done for the
 # HREF attribute values of Anchors and LINKs that consist solely of
 # a fragment.
 #
 #SEEK_FRAG_AREA_IN_CUR:TRUE
 
 .h1 CGI scripts
 # These settings control Lynx's ability to execute various types of scripts.
 
 .h2 LOCAL_EXECUTION_LINKS_ALWAYS_ON
 .h2 LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE
 # Local execution links and scripts are by default completely disabled,
 # unless a change is made to the userdefs.h file to enable them or
 # the configure script is used with the corresponding options
 # (-enable-exec-links and -enable-exec-scripts).
 # See the Lynx source code distribution and the userdefs.h
 # file for more detail on enabling execution links and scripts.
 #
 # If you have enabled execution links or scripts the following
 # two variables control Lynx's action when an execution link
 # or script is encountered.
 #
 # If LOCAL_EXECUTION_LINKS_ALWAYS_ON is set to TRUE any execution
 # link or script will be executed no matter where it came from.
 # This is EXTREMELY dangerous.  Since Lynx can access files from
 # anywhere in the world, you may encounter links or scripts that
 # will cause damage or compromise the security of your system.
 #
 # If LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE is set to TRUE only
 # links or scripts that reside on the local machine and are
 # referenced with a URL beginning with "file://localhost/" or meet
 # TRUSTED_EXEC or ALWAYS_TRUSTED_EXEC rules (see below) will be
 # executed.  This is much less dangerous than enabling all execution
 # links, but can still be dangerous.
 #
 #LOCAL_EXECUTION_LINKS_ALWAYS_ON:FALSE
 #LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:FALSE
 
 .h2 TRUSTED_EXEC
 # If LOCAL_EXECUTION_LINK_ON_BUT_NOT_REMOTE is TRUE, and no TRUSTED_EXEC
 # rule is defined, it defaults to "file://localhost/" and any lynxexec
 # or lynxprog command will be permitted if it was referenced from within
 # a document whose URL begins with that string.  If you wish to restrict the
 # referencing URLs further, you can extend the string to include a trusted
 # path.  You also can specify a trusted directory for http URLs, which will
 # then be treated as if they were local rather than remote.  For example:
 #
 #	TRUSTED_EXEC:file://localhost/trusted/
 #	TRUSTED_EXEC:http://www.wfbr.edu/trusted/
 #
 # If you also wish to restrict the commands which can be executed, create
 # a series of rules with the path (Unix) or command name (VMS) following
 # the string, separated by a tab.  For example:
 #
 # Unix:
 # ====
 #	TRUSTED_EXEC:file://localhost/<tab>/bin/cp
 #	TRUSTED_EXEC:file://localhost/<tab>/bin/rm
 # VMS:
 # ===
 #	TRUSTED_EXEC:file://localhost/<tab>copy
 #	TRUSTED_EXEC:file://localhost/<tab>delete
 #
 # Once you specify a TRUSTED_EXEC referencing string, the default is
 # replaced, and all the referencing strings you desire must be specified
 # as a series.  Similarly, if you associate a command with the referencing
 # string, you must specify all of the allowable commands as a series of
 # TRUSTED_EXEC rules for that string.  If you specify ALWAYS_TRUSTED_EXEC
 # rules below, you need not repeat them as TRUSTED_EXEC rules.
 #
 # If EXEC_LINKS and JUMPFILE have been defined, any lynxexec or lynxprog
 # URLs in that file will be permitted, regardless of other settings.  If
 # you also set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:TRUE and a single
 # TRUSTED_EXEC rule that will always fail (e.g., "none"), then *ONLY* the
 # lynxexec or lynxprog URLs in JUMPFILE (and any ALWAYS_TRUSTED_EXEC rules,
 # see below) will be allowed.  Note, however, that if Lynx was compiled with
 # CAN_ANONYMOUS_JUMP set to FALSE (default is TRUE), or -restrictions=jump
 # is included with the -anonymous switch at run time, then users of an
 # anonymous account will not be able to access the jumps file or enter
 # 'j'ump shortcuts, and this selective execution feature will be overridden
 # as well (i.e., they will only be able to access lynxexec or lynxprog
 # URLs which meet any ALWAYS_TRUSTED_EXEC rules).
 #
 #TRUSTED_EXEC:none
 
 .h2 ALWAYS_TRUSTED_EXEC
 # If EXEC_LINKS was defined, any lynxexec or lynxprog URL can be made
 # always enabled by an ALWAYS_TRUSTED_EXEC rule for it.  This is useful for
 # anonymous accounts in which you have disabled execution links generally,
 # and may also have disabled jumps file links, but still want to allow
 # execution of particular utility scripts or programs.  The format is
 # like that for TRUSTED_EXEC.  For example:
 #
 # Unix:
 # ====
 #   ALWAYS_TRUSTED_EXEC:file://localhost/<tab>/usr/local/kinetic/bin/usertime
 #   ALWAYS_TRUSTED_EXEC:http://www.more.net/<tab>/usr/local/kinetic/bin/who.sh
 # VMS:
 # ===
 #   ALWAYS_TRUSTED_EXEC:file://localhost/<tab>usertime
 #   ALWAYS_TRUSTED_EXEC:http://www.more.net/<tab>show users
 #
 # The default ALWAYS_TRUSTED_EXEC rule is "none".
 #
 #ALWAYS_TRUSTED_EXEC:none
 
 .h2 TRUSTED_LYNXCGI
 # Unix:
 # =====
 # TRUSTED_LYNXCGI rules define the permitted sources and/or paths for
 # lynxcgi links (if LYNXCGI_LINKS is defined in userdefs.h).  The format
 # is the same as for TRUSTED_EXEC rules (see above).  Example rules:
 #
 #	TRUSTED_LYNXCGI:file://localhost/
 #	TRUSTED_LYNXCGI:<tab>/usr/local/etc/httpd/cgi-bin/
 #	TRUSTED_LYNXCGI:file://localhost/<tab>/usr/local/www/cgi-bin/
 #
 # VMS:
 # ====
 # Do not define this.
 #
 # The default TRUSTED_LYNXCGI rule is "none".
 #
 #TRUSTED_LYNXCGI:none
 
 .h2 LYNXCGI_ENVIRONMENT
 # Unix:
 # =====
 # LYNXCGI_ENVIRONMENT adds the current value of the specified
 # environment variable to the list of environment variables passed on to the
 # lynxcgi script.  Useful variables are HOME, USER, etc...  If proxies
 # are in use, and the script invokes another copy of lynx (or a program like
 # wget) in a subsidiary role, it can be useful to add http_proxy and other
 # *_proxy variables.
 #
 # VMS:
 # ====
 # Do not define this.
 #
 #LYNXCGI_ENVIRONMENT:
 
 .h2 LYNXCGI_DOCUMENT_ROOT
 # Unix:
 # =====
 # LYNXCGI_DOCUMENT_ROOT is the value of DOCUMENT_ROOT that will be passed
 # to lynxcgi scripts.  If set and the URL has PATH_INFO data, then
 # PATH_TRANSLATED will also be generated.  Examples:
 #	LYNXCGI_DOCUMENT_ROOT:/usr/local/etc/httpd/htdocs
 #	LYNXCGI_DOCUMENT_ROOT:/data/htdocs/
 #
 # VMS:
 # ====
 # Do not define this.
 #
 #LYNXCGI_DOCUMENT_ROOT:
 
 .h1 Cookies
 
 .h2 FORCE_SSL_COOKIES_SECURE
 # If FORCE_SSL_COOKIES_SECURE is set to TRUE, then SSL encrypted cookies
 # received from https servers never will be sent unencrypted to http
 # servers.  The compilation default is to impose this block only if the
 # https server included a secure attribute for the cookie.  The normal
 # default or that defined here can be toggled via the -force_secure
 # command line switch.
 #
 #FORCE_SSL_COOKIES_SECURE:FALSE
 
 .h1 Internal Behavior
 
 .h2 MAIL_SYSTEM_ERROR_LOGGING
 #  MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of
 #  the information, or ALERTMAIL if there is no owner, every time
 #  that a document cannot be accessed!
 #
 #  NOTE:  This can generate A LOT of mail, be warned.
 #
 #MAIL_SYSTEM_ERROR_LOGGING:FALSE
 
 .h2 CHECKMAIL
 # If CHECKMAIL is set to TRUE, the user will be informed (via a statusline
 # message) about the existence of any unread mail at startup of Lynx, and
 # will get statusline messages if subsequent new mail arrives.  If a jumps
 # file with a lynxprog URL for invoking mail is available, or your html
 # pages include an mail launch file URL, the user thereby can access mail
 # and read the messages.  The checks and statusline reports will not be
 # performed if Lynx has been invoked with the -restrictions=mail switch.
 #
 # VMS USERS !!!
 # =============
 # New mail is normally broadcast as it arrives, via "unsolicited screen
 # broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W
 # command.  You may prefer to disable the broadcasts and use CHECKMAIL
 # instead (e.g., in a public account which will be used by people who
 # are ignorant about VMS).
 #
 #CHECKMAIL:FALSE
 
 .h1 News-groups
 
 .h2 NNTPSERVER
 # To enable news reading ability via Lynx, the environment variable NNTPSERVER
 # must be set so that it points to your site's NNTP server
 # (see Lynx Users Guide on environment variables).
 # Lynx respects RFC 1738
 .url http://tools.ietf.org/html/rfc1738
 # and does not accept a host field in news URLs (use nntp: instead of news: for
 # the scheme if you wish to specify an NNTP host in a URL, as explained in the
 # RFC).  If you have not set the variable externally, you can set it at run
 # time via this configuration file.  It will not override an external setting.
 # Note that on VMS it is set as a process logical rather than symbol, and will
 # outlive the Lynx image.
 # The news reading facility in Lynx is quite limited.  Lynx does not provide a
 # full featured news reader with elaborate error checking and safety features.
 #
 #NNTPSERVER:news.server.dom
 
 .h2 LIST_NEWS_NUMBERS
 # If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list and include
 # the numbers of articles in news listings, instead of using an unordered
 # list.  The default is defined in userdefs.h, and can be overridden here.
 #
 #LIST_NEWS_NUMBERS:FALSE
 
 .h2 LIST_NEWS_DATES
 # If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of articles in
 # news listings.  The dates always are included in the articles, themselves.
 # The default is defined in userdefs.h, and can be overridden here.
 #
 #LIST_NEWS_DATES:FALSE
 
 .h2 NEWS_CHUNK_SIZE
 .h2 NEWS_MAX_CHUNK
 # NEWS_CHUNK_SIZE and NEWS_MAX_CHUNK regulate the chunking of news article
 # listings with inclusion of links for listing earlier and/or later articles.
 # The defaults are defined in HTNews.c as 30 and 40, respectively.  If the
 # news group contains more than NEWS_MAX_CHUNK articles, they will be listed
 # in NEWS_CHUNK_SIZE chunks.  You can change the defaults here, and/or on
 # the command line via -newschunksize=NUMBER and/or -newsmaxchunk=NUMBER
 # switches.  Note that if the chunk size is increased, here or on the command
 # line, to a value greater than the current maximum, the maximum will be
 # increased to that number.  Conversely, if the maximum is set to a number
 # less than the current chunk size, the chunk size will be reduced to that
 # number.  Thus, you need use only one of the two switches on the command
 # line, based on the direction of intended change relative to the compilation
 # or configuration defaults.  The compilation defaults ensure that there will
 # be at least 10 earlier articles before bothering to chunk and create a link
 # for earlier articles.
 #
 #NEWS_CHUNK_SIZE:30
 #NEWS_MAX_CHUNK:40
 
 .h2 NEWS_POSTING
 # Set NEWS_POSTING to FALSE if you do not want to support posting to
 # news groups via Lynx.  If left TRUE, Lynx will use its news gateway to
 # post new messages or followups to news groups, using the URL schemes
 # described in the "Supported URLs" section of the online 'h'elp.  The
 # posts will be attempted via the nntp server specified in the URL, or
 # if none was specified, via the NNTPSERVER configuration or environment
 # variable.  Links with these URLs for posting or sending followups are
 # created by the news gateway when reading group listings or articles
 # from nntp servers if the server indicates that it permits posting.
 # The compilation default set in userdefs.h can be changed here.  If
 # the default is TRUE, posting can still be disallowed via the
 # -restrictions command line switch.
 # The posting facility in Lynx is quite limited.  Lynx does not provide a
 # full featured news poster with elaborate error checking and safety features.
 #
 #NEWS_POSTING:TRUE
 
 .h2 LYNX_SIG_FILE
 # LYNX_SIG_FILE defines the name of a file containing a signature which
 # can be appended to email messages and news postings or followups.  The
 # user will be prompted whether to append it.  It is sought in the home
 # directory.  If it is in a subdirectory, begin it with a dot-slash
 # (e.g., ./lynx/.lynxsig).  The definition is set in userdefs.h and can
 # be changed here.
 #
 #LYNX_SIG_FILE:.lynxsig
 
 .h1 Bibliographic Protocol (bibp scheme)
 
 .h2 BIBP_GLOBAL_SERVER
 # BIBP_GLOBAL_SERVER is the default global server for bibp: links, used
 # when a local bibhost or document-specified citehost is unavailable.
 # Set in userdefs.h and can be changed here.
 #BIBP_GLOBAL_SERVER:http://usin.org/
 
 .h2 BIBP_BIBHOST
 # BIBP_BIBHOST is the URL at which local bibp service may be found, if
 # it exists.   Defaults to http://bibhost/ for protocol conformance, but
 # may be overridden here or via -bibhost parameter.
 #BIBP_BIBHOST:http://bibhost/
 
 .h1 Interaction
 # These settings control interaction of the user with lynx.
 
 .h2 SCROLLBAR
 # If SCROLLBAR is set TRUE, Lynx will show scrollbar on windows.  With mouse
 # enabled, the scrollbar strip outside the bar is clickable, and scrolls the
 # window by pages.  The appearance of the scrollbar can be changed from
 # LYNX_LSS file:  define attributes scroll.bar, scroll.back (for the bar, and
 # for the strip along which the scrollbar moves).
 #SCROLLBAR:FALSE
 
 .h2 SCROLLBAR_ARROW
 # If SCROLLBAR_ARROW is set TRUE, Lynx's scrollbar will have arrows at the
 # ends.  With mouse enabled, the arrows are clickable, and scroll the window by
 # 2 lines.  The appearance of the scrollbar arrows can be changed from LYNX_LSS
 # file:  define attributes scroll.arrow, scroll.noarrow (for enabled-arrows,
 # and disabled arrows).  An arrow is "disabled" if the bar is at this end of
 # the strip.
 #SCROLLBAR_ARROW:TRUE
 
 .h2 USE_MOUSE
 # If Lynx is configured with ncurses, PDcurses or slang & USE_MOUSE is TRUE,
 # users can perform commands by left-clicking certain parts of the screen:
 #   on a link = `g'oto + ACTIVATE (i.e., move highlight & follow the link);
 #   on the top/bottom lines = PREV/NEXT_PAGE (i.e., go up/down 1 page);
 #   on the top/bottom left corners = PREV/NEXT_DOC (i.e., go to the previous
 #   document / undo goto previous document);
 #   on the top/bottom right corners = HISTORY/VLINKS (i.e., call up the history
 #   page or visited links page if on history page).
 # NB if the mouse is defined in this way, it will not be available
 # for copy/paste operations using the clipboard of a desktop manager:
 # for flexibility instead, use the command-line switch  -use_mouse .
 #
 # ncurses and slang have built-in support for the xterm mouse protocol.  In
 # addition, ncurses can be linked with the gpm mouse library, to automatically
 # provide support for this interface in applications such as Lynx.  (Please
 # read the ncurses faq to work around broken gpm configurations packaged by
 # some distributors).  PDCurses implements mouse support for win32 console
 # windows, as does slang.
 #USE_MOUSE:FALSE
 
 .h1 HTML Parsing
 # These settings control the way Lynx parses invalid HTML
 # and how it may resolve such issues.
 
 .h2 COLLAPSE_BR_TAGS
 # If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial BR tags.
 # If set TRUE, two or more concurrent BRs will be collapsed into a single
 # line break.  Note that the valid way to insert extra blank lines in HTML
 # is via a PRE block with only newlines in the block.
 #
 #COLLAPSE_BR_TAGS:TRUE
 
 .h2 TRIM_BLANK_LINES
 # If TRIM_BLANK_LINES is set FALSE, Lynx will not trim trailing blank lines
 # from the document.  Also, Lynx will not collapse BR-tags onto the previous
 # line when it happens to be empty.
 #TRIM_BLANK_LINES:TRUE
 
 .h2 TAGSOUP
 # If TAGSOUP is set, Lynx uses the "Tag Soup DTD" rather than "SortaSGML".
 # The two approaches differ by the style of error detection and recovery.
 # Tag Soup DTD allows for improperly nested tags; SortaSGML is stricter.
 #TAGSOUP:FALSE
 
 .h1 Cookies
 
 .h2 SET_COOKIES
 # If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers
 # in http server replies.  Note that if a COOKIE_FILE is in use (see
 # below) that contains cookies at startup, Lynx will still send those
 # persistent cookies in requests as appropriate.  Setting SET_COOKIES
 # to FALSE just prevents accepting any new cookies from servers.  To
 # prevent all cookie processing (sending *and* receiving) in a session,
 # make sure that PERSISTENT_COOKIES is not TRUE or that COOKIE_FILE does
 # not point to a file with cookies, in addition to setting SET_COOKIES
 # to FALSE.
 # The default is defined in userdefs.h, and can be overridden here,
 # and/or toggled via the -cookies command line switch.
 #
 #SET_COOKIES:TRUE
 
 .h2 ACCEPT_ALL_COOKIES
 # If ACCEPT_ALL_COOKIES is set TRUE, Lynx will accept cookies from all
 # domains with no user interaction.  This is equivalent to automatically
 # replying to all cookie 'Allow?' prompts with 'A'lways.  Note that it
 # does not preempt validity checking, which has to be controlled separately
 # (see below).
 # The default is defined in userdefs.h and can be overridden here, or
 # in the .lynxrc file via an o(ptions) screen setting.  It may also be
 # toggled via the -accept_all_cookies command line switch.
 #
 #ACCEPT_ALL_COOKIES:FALSE
 
 .h2 COOKIE_ACCEPT_DOMAINS
 .h2 COOKIE_REJECT_DOMAINS
 # COOKIE_ACCEPT_DOMAINS and COOKIE_REJECT_DOMAINS are comma-delimited lists
 # of domains from which Lynx should automatically accept or reject cookies
 # without asking for confirmation.  If the same domain is specified in both
 # lists, rejection will take precedence.
 # Note that in order to match cookies, domains have to be spelled out exactly
 # in the form in which they would appear on the Cookie Jar page (case is
 # insignificant).  They are not wildcards.  Domains that apply to more than
 # one host have a leading '.', but have to match *the cookie's* domain
 # exactly.
 #
 #COOKIE_ACCEPT_DOMAINS:
 #COOKIE_REJECT_DOMAINS:
 
 .h2 COOKIE_LOOSE_INVALID_DOMAINS
 .h2 COOKIE_STRICT_INVALID_DOMAINS
 .h2 COOKIE_QUERY_INVALID_DOMAINS
 # COOKIE_LOOSE_INVALID_DOMAINS, COOKIE_STRICT_INVALID_DOMAINS, and
 # COOKIE_QUERY_INVALID_DOMAINS are comma-delimited lists of domains.
 # They control the degree of validity checking that is applied to cookies
 # for the specified domains.
 # Note that in order to match cookies, domains have to be spelled out exactly
 # in the form in which they would appear on the Cookie Jar page (case is
 # insignificant).  They are not wildcards.  Domains that apply to more than
 # one host have a leading '.', but have to match *the cookie's* domain
 # exactly.
 # If a domain is set to strict checking, strict conformance to RFC 2109 will
 # be applied.  A domain with loose checking will be allowed to set cookies
 # with an invalid path or domain attribute.  All domains will default to
 # asking the user for confirmation in case of an invalid path or domain.
 # Cookie validity checking takes place as a separate step before the
 # final decision to accept or reject (see previous options), therefore
 # a cookie that passes validity checking may still be automatically
 # rejected or cause another prompt.
 #
 #COOKIE_LOOSE_INVALID_DOMAINS:
 #COOKIE_STRICT_INVALID_DOMAINS:
 #COOKIE_QUERY_INVALID_DOMAINS:
 
 .h2 MAX_COOKIES_DOMAIN
 .h2 MAX_COOKIES_GLOBAL
 .h2 MAX_COOKIES_BUFFER
 # MAX_COOKIES_DOMAIN,
 # MAX_COOKIES_GLOBAL and
 # MAX_COOKIES_BUFFER are limits on the total number of cookies for each domain,
 # globally, and the per-cookie buffer size.  These limits are by default large
 # enough for reasonable usage; if they are very high, some sites may present
 # undue performance waste.
 #
 #MAX_COOKIES_DOMAIN:50
 #MAX_COOKIES_GLOBAL:500
 #MAX_COOKIES_BUFFER:4096
 
 .h2 PERSISTENT_COOKIES
 # PERSISTENT_COOKIES indicates that cookies should be read at startup from
 # the COOKIE_FILE, and saved at exit for storage between Lynx sessions.
 # It is not used if Lynx was compiled without USE_PERSISTENT_COOKIES.
 # The default is FALSE, so that the feature needs to be enabled here
 # explicitly if you want it.
 #
 #PERSISTENT_COOKIES:FALSE
 
 .h2 COOKIE_FILE
 # COOKIE_FILE is the default file from which persistent cookies are read
 # at startup (if the file exists), if Lynx was compiled with
 # USE_PERSISTENT_COOKIES and the PERSISTENT_COOKIES option is enabled.
 # The cookie file can also be specified in .lynxrc or on the command line.
 #
 #COOKIE_FILE:~/.lynx_cookies
 
 .h2 COOKIE_SAVE_FILE
 # COOKIE_SAVE_FILE is the default file in which persistent cookies are
 # stored at exit, if Lynx was compiled with USE_PERSISTENT_COOKIES and the
 # PERSISTENT_COOKIES option is enabled.  The cookie save file can also be
 # specified on the command line.
 #
 # With an interactive Lynx session, COOKIE_SAVE_FILE will default to
 # COOKIE_FILE if it is not set.  With a non-interactive Lynx session (e.g.,
 # -dump), cookies will only be saved to file if COOKIE_SAVE_FILE is set.
 #
 #COOKIE_SAVE_FILE:~/.lynx_cookies
 
 .h1 Mail-related
 
 .h2 SYSTEM_MAIL
 .h2 SYSTEM_MAIL_FLAGS
 # VMS:
 # ===
 # The mail command and qualifiers are defined in userdefs.h.  Lynx
 # will spawn a subprocess to send replies and error messages.  The
 # command, and qualifiers (if any), can be re-defined here.  If
 # you use PMDF then headers will we passed via a header file.
 # If you use "generic" VMS MAIL, the subject will be passed on the
 # command line via a /subject="SUBJECT" qualifier, and inclusion
 # of other relevant headers may not be possible.
 # If your mailer uses another syntax, some hacking of the mailform()
 # mailmsg() and reply_by_mail() functions in LYMail.c, and send_file_to_mail()
 # function in LYPrint.c, may be required.
 #
 .ex 2
 #SYSTEM_MAIL:PMDF SEND
 #SYSTEM_MAIL_FLAGS:/headers
 #
 .ex 2
 #SYSTEM_MAIL:MAIL
 #SYSTEM_MAIL_FLAGS:
 #
 # Unix:
 #======
 # The mail path and flags normally are defined for sendmail (or submit
 # with MMDF) in userdefs.h.  You can change them here, but should first
 # read the zillions of CERT advisories about security problems with Unix
 # mailers.
 #
 .ex 2
 #SYSTEM_MAIL:/usr/mmdf/bin/submit
 #SYSTEM_MAIL_FLAGS:-mlruxto,cc\*
 #
 .ex 2
 #SYSTEM_MAIL:/usr/sbin/sendmail
 #SYSTEM_MAIL_FLAGS:-t -oi
 #
 .ex 2
 #SYSTEM_MAIL:/usr/lib/sendmail
 #SYSTEM_MAIL_FLAGS:-t -oi
 #
 # Win32:
 #=======
 # The Win32 port assumes that the mailer cannot read via a pipe.  That is, it
 # must read all information from files.  The "sendmail" utility in the 2.8.1
 # release is able to work with that assumption.  There is no way to tell the
 # Win32 port of Lynx to send its information to the sendmail utility via a
 # pipe.
 #
 # Please read sendmail.txt in the LYNX_W32.ZIP distribution
 .url	http://invisible-mirror.net/archives/lynx/tarballs/lynx2.8.1_w32.zip
 .url	ftp://ftp.invisible-island.net/lynx/tarballs/lynx2.8.1_w32.zip
 #
 # As an alternative, the newer "sendmail for windows" may be useful:
 .url	http://glob.com.au/sendmail/
 #
 # See also BLAT_MAIL and ALT_BLAT_MAIL flags.
 #
 #SYSTEM_MAIL:sendmail -f me@my.host -h my.host -r my.smtp.mailer -m SMTP
 
 .h2 MAIL_ADRS
 # VMS ONLY:
 # ========
 # MAIL_ADRS is defined in userdefs.h and normally is structured for PMDF's
 # IN%"INTERNET_ADDRESS" scheme.  The %s is replaced with the address given
 # by the user.  If you are using a different Internet mail transport, change
 # the IN appropriately (e.g., to SMTP, MX, or WINS).
 #
 #MAIL_ADRS:"IN%%""%s"""
 
 .h2 USE_FIXED_RECORDS
 # VMS ONLY:
 # ========
 # If USE_FIXED_RECORDS is set to TRUE here or in userdefs.h, Lynx will
 # convert 'd'ownloaded binary files to FIXED 512 record format before saving
 # them to disk or acting on a DOWNLOADER option.  If set to FALSE, the
 # headers of such files will indicate that they are Stream_LF with Implied
 # Carriage Control, which is incorrect, and can cause downloading software
 # to get confused and unhappy.  If you do set it FALSE, you can use the
 # FIXED512.COM command file, which is included in this distribution, to do
 # the conversion externally.
 #
 #USE_FIXED_RECORDS:TRUE
 
 .h1 Keyboard Input
 # These settings control the way Lynx interprets user input.
 
 .h2 VI_KEYS_ALWAYS_ON
 .h2 EMACS_KEYS_ALWAYS_ON
 # Vi or Emacs movement keys, i.e. familiar hjkl or ^N^P^F^B .
 # These are defaults, which can be changed in the Options Menu or .lynxrc .
 VI_KEYS_ALWAYS_ON:TRUE
 #EMACS_KEYS_ALWAYS_ON:FALSE
 
 .h2 DEFAULT_KEYPAD_MODE
 # DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS
 #                                or LINKS_ARE_NOT_NUMBERED (the same)
 #                                or LINKS_ARE_NUMBERED
 #                                or LINKS_AND_FIELDS_ARE_NUMBERED
 #                                or FIELDS_ARE_NUMBERED
 # to specify whether numbers (e.g. [10]) appear next to all links,
 # allowing immediate access by entering the number on the keyboard,
 # or numbers on the numeric key-pad work like arrows;
 # the "FIELDS" options cause form fields also to be numbered.
 # This may be overridden by the keypad_mode setting in .lynxrc,
 # and can also be changed via the Options Menu.
 #
 #DEFAULT_KEYPAD_MODE:NUMBERS_AS_ARROWS
 
 .h2 NUMBER_LINKS_ON_LEFT
 .h2 NUMBER_FIELDS_ON_LEFT
 # Denotes the position for link- and field-numbers (whether it is on the left
 # or right of the anchor).  These are subject to DEFAULT_KEYPAD_MODE, which
 # determines whether numbers are shown.
 #NUMBER_LINKS_ON_LEFT:TRUE
 #NUMBER_FIELDS_ON_LEFT:TRUE
 
 .h2 DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS
 # Obsolete form of DEFAULT_KEYPAD_MODE,
 # numbers work like arrows or numbered links.
 # Set to TRUE, indicates numbers act as arrows,
 # and set to FALSE indicates numbers refer to numbered links on the page.
 # LINKS_AND_FIELDS_ARE_NUMBERED cannot be set by this option because
 # it allows only two values (true and false).
 #
 #DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS:TRUE
 
 .h2 CASE_SENSITIVE_ALWAYS_ON
 # The default search type.
 # This is a default that can be overridden by the user!
 #
 #CASE_SENSITIVE_ALWAYS_ON:FALSE
 
 .h1 Auxiliary Facilities
 
 .h2 DEFAULT_BOOKMARK_FILE
 # DEFAULT_BOOKMARK_FILE is the filename used for storing personal bookmarks.
 # It will be prepended by the user's home directory.
 # NOTE that a file ending in .html or other suffix mapped to text/html
 # should be used to ensure its treatment as HTML.  The built-in default
 # is lynx_bookmarks.html.  On both Unix and VMS, if a subdirectory off of
 # the HOME directory is desired, the path should begin with "./" (e.g.,
 # ./BM/lynx_bookmarks.html), but the subdirectory must already exist.
 # Lynx will create the bookmark file, if it does not already exist, on
 # the first ADD_BOOKMARK attempt if the HOME directory is indicated
 # (i.e., if the definition is just filename.html without any slashes),
 # but requires a pre-existing subdirectory to create the file there.
 # The user can re-define the default bookmark file, as well as a set
 # of sub-bookmark files if multiple bookmark file support is enabled
 # (see below), via the 'o'ptions menu, and can save those definitions
 # in the .lynxrc file.
 #
 #DEFAULT_BOOKMARK_FILE:lynx_bookmarks.html
 
 .h2 MULTI_BOOKMARK_SUPPORT
 # If MULTI_BOOKMARK_SUPPORT is set TRUE, and BLOCK_MULTI_BOOKMARKS (see
 # below) is FALSE, and sub-bookmarks exist, all bookmark operations will
 # first prompt the user to select an active sub-bookmark file or the
 # default bookmark file.  FALSE is the default so that one (the default)
 # bookmark file will be available initially.  The definition here will
 # override that in userdefs.h.  The user can turn on multiple bookmark
 # support via the 'o'ptions menu, and can save that choice as the startup
 # default via the .lynxrc file.  When on, the setting can be STANDARD or
 # ADVANCED.  If SUPPORT is set to the latter, and the user mode also is
 # ADVANCED, the VIEW_BOOKMARK command will invoke a statusline prompt at
 # which the user can enter the letter token (A - Z) of the desired bookmark,
 # or '=' to get a menu of available bookmark files.  The menu always is
 # presented in NOVICE or INTERMEDIATE mode, or if the SUPPORT is set to
 # STANDARD.  No prompting or menu display occurs if only one (the startup
 # default) bookmark file has been defined (define additional ones via the
 # 'o'ptions menu).  The startup default, however set, can be overridden on
 # the command line via the -restrictions=multibook or the -anonymous or
 # -validate switches.
 #
 #MULTI_BOOKMARK_SUPPORT:FALSE
 
 .h2 BLOCK_MULTI_BOOKMARKS
 # If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will
 # be forced off, and cannot to toggled on via the 'o'ptions menu.  The
 # compilation setting is normally FALSE, and can be overridden here.
 # It can also be set via the -restrictions=multibook or the -anonymous
 # or -validate command line switches.
 #
 #BLOCK_MULTI_BOOKMARKS:FALSE
 
 .h1 Interaction
 
 .h2 DEFAULT_USER_MODE
 # DEFAULT_USER_MODE sets the default user mode for Lynx users.
 # NOVICE shows a three line help message at the bottom of the screen.
 # INTERMEDIATE shows normal amount of help (one line).
 # ADVANCED help is replaced by the URL of the current link.
 #
 #DEFAULT_USER_MODE:NOVICE
 
 .h1 External Programs
 
 .h2 DEFAULT_EDITOR
 # If DEFAULT_EDITOR is defined, users may edit local documents with it
 # & it will also be used for sending mail messages.
 # If no editor is defined here or by the user,
 # the user will not be able to edit local documents
 # and a primitive line-oriented mail-input mode will be used.
 #
 # For sysadmins: do not define a default editor
 # unless you know EVERY user will know how to use it;
 # users can easily define their own editor in the Options Menu.
 #
 #DEFAULT_EDITOR:
 
 .h2 SYSTEM_EDITOR
 # SYSTEM_EDITOR behaves the same as DEFAULT_EDITOR,
 # except that it can't be changed by users.
 #
 #SYSTEM_EDITOR:
 
 .h3 POSITIONABLE_EDITOR
 # If POSITIONABLE_EDITOR is defined once or multiple times and if the same
 # editor is used as editor in lynx, lynx will use its features, i.e., adding an
 # option to set the initial line-position, when editing files and textarea.
 # The commented editors below are already known; there is no need to uncomment
 # them.
 #
 #POSITIONABLE_EDITOR:emacs
 #POSITIONABLE_EDITOR:jed
 #POSITIONABLE_EDITOR:jmacs
 #POSITIONABLE_EDITOR:joe
 #POSITIONABLE_EDITOR:jove
 #POSITIONABLE_EDITOR:jpico
 #POSITIONABLE_EDITOR:jstar
 #POSITIONABLE_EDITOR:nano
 #POSITIONABLE_EDITOR:pico
 #POSITIONABLE_EDITOR:rjoe
 #POSITIONABLE_EDITOR:vi
 
 .h1 Proxy
 
 .h2 HTTP_PROXY
 .h2 HTTPS_PROXY
 .h2 FTP_PROXY
 .h2 GOPHER_PROXY
 .h2 NEWSPOST_PROXY
 .h2 NEWSREPLY_PROXY
 .h2 NEWS_PROXY
 .h2 NNTP_PROXY
 .h2 SNEWSPOST_PROXY
 .h2 SNEWSREPLY_PROXY
 .h2 SNEWS_PROXY
 .h2 WAIS_PROXY
 .h2 FINGER_PROXY
 .h2 CSO_PROXY
 # Lynx version 2.2 and beyond supports the use of proxy servers that can act as
 # firewall gateways and caching servers.  They are preferable to the older
 # gateway servers.  Each protocol used by Lynx can be mapped separately using
 # PROTOCOL_proxy environment variables (see Lynx Users Guide).  If you have not set
 # them externally, you can set them at run time via this configuration file.
 # They will not override external settings.  The no_proxy variable can be used
 # to inhibit proxying to selected regions of the Web (see below).  Note that on
 # VMS these proxy variables are set as process logicals rather than symbols, to
 # preserve lowercasing, and will outlive the Lynx image.
 #
 .ex 15
 #http_proxy:http://some.server.dom:port/
 #https_proxy:http://some.server.dom:port/
 #ftp_proxy:http://some.server.dom:port/
 #gopher_proxy:http://some.server.dom:port/
 #news_proxy:http://some.server.dom:port/
 #newspost_proxy:http://some.server.dom:port/
 #newsreply_proxy:http://some.server.dom:port/
 #snews_proxy:http://some.server.dom:port/
 #snewspost_proxy:http://some.server.dom:port/
 #snewsreply_proxy:http://some.server.dom:port/
 #nntp_proxy:http://some.server.dom:port/
 #wais_proxy:http://some.server.dom:port/
 #finger_proxy:http://some.server.dom:port/
 #cso_proxy:http://some.server.dom:port/
 #no_proxy:host.domain.dom
 
 .h2 NO_PROXY
 # The no_proxy variable can be a comma-separated list of strings defining
 # no-proxy zones in the DNS domain name space.  If a tail substring of the
 # domain-path for a host matches one of these strings, transactions with that
 # node will not be proxied.
 .ex
 #no_proxy:domain.path1,path2
 #
 # A single asterisk as an entry will override all proxy variables and no
 # transactions will be proxied.
 .ex
 #no_proxy:*
 # This is the only allowed use of * in no_proxy.
 #
 # Warning:  Note that setting 'il' as an entry in this list will block proxying
 # for the .mil domain as well as the .il domain.  If the entry is '.il' this
 # will not happen.
 
 .h1 External Programs
 
 .h2 PRINTER
 .h2 DOWNLOADER
 Open in feh:feh %s:TRUE
 .h2 UPLOADER
 # PRINTER, DOWNLOADER & UPLOADER DEFINITIONS:
 # Lynx has 4 pre-defined print options & 1 pre-defined download option,
 # which are called up on-screen when `p' or `d' are entered;
 # any number of options can be added by the user, as explained below.
 # Uploaders can be defined only for UNIX with DIRED_SUPPORT:
 # see the Makefile in the top directory & the header of src/LYUpload.c .
 #
 # For `p' pre-defined options are: `Save to local file', `E-mail the file',
 # `Print to screen' and `Print to local printer attached to vt100'.
 # `Print to screen' allows file transfers in the absence of alternatives
 # and is often the only option allowed here for anonymous users;
 # the 3rd & 4th options are not pre-defined for DOS/WINDOWS versions of Lynx.
 # For `d' the pre-defined option is: `Download to local file'.
 #
 # To define your own print or download option use the following formats:
 #
 # PRINTER:<name>:<command>:<option>:<lines/page>[:<environment>]
 #
 # DOWNLOADER:<name>:<command>:<option>[:<environment>]
 #
 # <name>       is what you will see on the print/download screen.
 #
 # <command>    is the command your system will execute:
 #              the 1st %s in the command will be replaced
 #              by the temporary filename used by Lynx;
 #              a 2nd %s will be replaced by a filename of your choice,
 #              for which Lynx will prompt, offering a suggestion.
 #              On Unix, which has pipes, you may use a '|' as the first
 #              character of the command, and Lynx will open a pipe to
 #              the command.
 #              If the command format of your printer/downloader requires
 #              a different layout, you will need to use a script
 #              (see the last 2 download examples below).
 #
 # <option>     TRUE : the printer/downloader will always be ENABLED,
 #              except that downloading is disabled when -validate is used;
 #              FALSE : both will be DISABLED for anonymous users
 #              and printing will be disabled when -noprint is used.
 #
 # <lines/page> (printers: optional) the number of lines/page (default 66):
 #              used to compute the approximate output size
 #              and prompt if the document is > 4 printer pages;
 #              it uses current screen length for the computation
 #              when `Print to screen' is selected.
 #
 # [:<environment>]
 #              optional, if XWINDOWS then printer/downloader will be
 #              enabled if DISPLAY environment variable IS defined and
 #              disabled otherwise, if environment is NON_XWINDOWS
 #              then printer/downloader will be enabled if DISPLAY
 #              environment variable IS NOT defined and disabled otherwise,
 #              for anything else or if environment is not specified
 #              printer/downloader is always enabled.
 #
 # You must put the whole definition on one line;
 # if you use a colon, precede it with a backslash.
 #
 # `Printer' can be any file-handling program you find useful,
 # even if it does not physically print anything.
 #
 # Usually, down/up-loading involves the use of (e.g.) Ckermit or ZModem
 # to transfer files to a user's local machine over a serial link,
 # but download options do not have to be download-protocol programs.
 #
 # Printer examples:
 .ex 3
 #PRINTER:Computer Center printer:lpr -Pccprt %s:FALSE
 #PRINTER:Office printer:lpr -POffprt %s:TRUE
 #PRINTER:VMS printer:print /queue=cc$print %s:FALSE:58
 # If you have a very busy VMS print queue
 # and Lynx deletes the temporary files before they have been queued,
 # use the VMSPrint.com included in the distribution:
 .ex
 #PRINTER:Busy VMS printer:@Lynx_Dir\:VMSPrint sys$print %s:FALSE:58
 # To specify a print option at run-time:
 # NBB if you have ANONYMOUS users, DO NOT allow this option!
 .ex
 #PRINTER:Specify at run-time:echo -n "Enter a print command\: "; read word; sh -c "$word %s":FALSE
 # To pass to a sophisticated file viewer: -k suppresses invocation
 # of hex display mode if 8-bit or control characters are present;
 # +s invokes secure mode (see ftp://space.mit.edu/pub/davis/most):
 .ex
 #PRINTER:Use Most to view:most -k +s %s:TRUE:23
 #
 # Downloader examples:
 # in Kermit, -s %s is the filename sent, -a %s the filename on arrival
 # (if they are given in reverse order here, the command will fail):
 .ex
 #DOWNLOADER:Use Kermit to download to the terminal:kermit -i -s %s -a %s:TRUE
 # NB don't use -k with Most, so that binaries will invoke hexadecimal mode:
 .ex
 #DOWNLOADER:Use Most to view:most +s %s:TRUE
 # The following example gives wrong filenames
 # (`sz' doesn't support a suggested filename parameter):
 .ex
 #DOWNLOADER:Use Zmodem to download to the local terminal:sz %s:TRUE
 # The following example returns correct filenames
 # by using a script to make a subdirectory in /tmp,
 # but may conflict with very strong security or permissions restrictions:
 .ex
 #DOWNLOADER:Use Zmodem to download to the local terminal:set %s %s;td=/tmp/Lsz$$;mkdir $td;ln -s $1 $td/"$2";sz $td/"$2";rm -r $td:TRUE
 .ex 2
 #UPLOADER:Use Kermit to upload from your computer: kermit -i -r -a %s:TRUE
 #UPLOADER:Use Zmodem to upload from your computer: rz %s:TRUE
 #
 # Note for OS/390: /* S/390 -- gil -- 1464 */
 # The following is strongly recommended to undo ASCII->EBCDIC conversion.
 .ex
 #DOWNLOADER:Save OS/390 binary file: iconv -f IBM-1047 -t ISO8859-1 %s >%s:FALSE
 
 .h1 Interaction
 
 .h2 NO_DOT_FILES
 # If NO_DOT_FILES is TRUE (normal default via userdefs.h), the user will not
 # be allowed to specify files beginning with a dot in reply to output filename
 # prompts, and files beginning with a dot (e.g., file://localhost/path/.lynxrc)
 # will not be included in the directory browser's listings.  If set FALSE, you
 # can force it to be treated as TRUE via -restrictions=dotfiles.  If set FALSE
 # and not forced TRUE, the user can regulate it via the 'o'ptions menu (and
 # may save the preference in the RC file).
 #
 #NO_DOT_FILES:TRUE
 
 .h1 Internal Behavior
 
 .h2 NO_FROM_HEADER
 # If NO_FROM_HEADER is set FALSE, From headers will be sent in transmissions
 # to http or https servers if the personal_mail_address has been defined via
 # the 'o'ptions menu.  The compilation default is TRUE (no From header is
 # sent) and the default can be changed here.  The default can be toggled at
 # run time via the -from switch.  Note that transmissions of From headers
 # have become widely considered to create an invasion of privacy risk.
 #
 #NO_FROM_HEADER:TRUE
 
 .h2 NO_REFERER_HEADER
 # If NO_REFERER_HEADER is TRUE, Referer headers never will be sent in
 # transmissions to servers.  Lynx normally sends the URL of the document
 # from which the link was derived, but not for startfile URLs, 'g'oto
 # URLs, 'j'ump shortcuts, bookmark file links, history list links, or
 # URLs that include the content from form submissions with method GET.
 # If left FALSE here, it can be set TRUE at run time via the -noreferer
 # switch.
 #
 #NO_REFERER_HEADER:FALSE
 
 .h1 Internal Behavior
 
 .h2 NO_FILE_REFERER
 # If NO_FILE_REFERER is TRUE, Referer headers never will be sent in
 # transmissions to servers for links or actions derived from documents
 # or forms with file URLs.  This ensures that paths associated with
 # the local file system are never indicated to servers, even if
 # NO_REFERER_HEADER is FALSE.  If set to FALSE here, it can still be
 # set TRUE at run time via the -nofilereferer switch.
 #
 #NO_FILE_REFERER:TRUE
 
 .h2 REFERER_WITH_QUERY
 # REFERER_WITH_QUERY controls what happens when the URL in a Referer
 # header to be sent would contain a query part in the form of a '?'
 # character followed by one or more attribute=value pairs.  Query parts
 # often contain sensitive or personal information resulting from filling
 # out forms, or other info that allows tracking of a user's browsing path
 # through a site, an thus should not be put in a Referer header (which may
 # get sent to an unrelated third-party site).  On the other hand, some
 # sites (improperly) rely on browsers sending Referer headers, even when
 # the user is coming from a page whose URL has a query part.
 #
 # If REFERER_WITH_QUERY is SEND, full Referer headers will be sent
 # including the query part (unless sending of Referer is disabled in
 # general, see NO_REFERER_HEADER above).  If REFERER_WITH_QUERY is
 # PARTIAL, the Referer header will contain a partial URL, with the query
 # part stripped off.  This is not strictly correct, but should satisfy
 # those sites that check only whether the user arrived at a page from an
 # "outside" link.  If REFERER_WITH_QUERY is set to DROP (or anything else
 # unrecognized), the default, no Referer header is sent at all in this
 # situation.
 #
 #REFERER_WITH_QUERY:DROP
 
 .h1 Appearance
 
 .h2 VERBOSE_IMAGES
 # VERBOSE_IMAGES controls whether Lynx replaces [LINK], [INLINE] and [IMAGE]
 # (for images without ALT) with filenames of these images.
 # This can be useful in determining what images are important
 # and which are mere decorations, e.g. button.gif, line.gif,
 # provided the author uses meaningful names.
 #
 # The definition here will override the setting in userdefs.h.
 #
 #VERBOSE_IMAGES:TRUE
 
 .h2 MAKE_LINKS_FOR_ALL_IMAGES
 # If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links
 # which can be ACTIVATEd.  For inlines, the ALT or pseudo-ALT ("[INLINE]")
 # strings will be links for the resolved SRC rather than just text.
 # For ISMAP or other graphic links, ALT or pseudo-ALT ("[ISMAP]" or "[LINK]")
 # will have '-' and a link labeled "[IMAGE]" for the resolved SRC appended.
 # See also VERBOSE_IMAGES flag.
 #
 # The definition here will override that in userdefs.h
 # and can be toggled via an "-image_links" command-line switch.
 # The user can also use the LYK_IMAGE_TOGGLE key (default `*')
 # or `Show Images' in the Form-based Options Menu.
 #
 #MAKE_LINKS_FOR_ALL_IMAGES:FALSE
 
 .h2 MAKE_PSEUDO_ALTS_FOR_INLINES
 # If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which don't specify
 # an ALT string will not have "[INLINE]" inserted as a pseudo-ALT,
 # i.e. they'll be treated as having ALT="".
 # Otherwise (if TRUE), pseudo-ALTs will be created for inlines,
 # so that they can be used as links to the SRCs.
 # See also VERBOSE_IMAGES flag.
 #
 # The definition here will override that in userdefs.h
 # and can be toggled via a "-pseudo_inlines" command-line switch.
 # The user can also use the LYK_INLINE_TOGGLE key (default `[')
 # or `Show Images' in the Form-based Options Menu.
 #
 #MAKE_PSEUDO_ALTS_FOR_INLINES:TRUE
 
 .h2 SUBSTITUTE_UNDERSCORES
 # If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used
 # for emphasis tags in dumps.
 #
 # The default defined here will override that in userdefs.h, and the user
 # can toggle the default via a "-underscore" command line switch.
 #
 #SUBSTITUTE_UNDERSCORES:FALSE
 
 .h1 Interaction
 
 .h2 QUIT_DEFAULT_YES
 # If QUIT_DEFAULT_YES is TRUE then when the QUIT command is entered, any
 # response other than n or N will confirm.  It should be FALSE if you
 # prefer the more conservative action of requiring an explicit Y or y to
 # confirm.  The default defined here will override that in userdefs.h.
 #
 #QUIT_DEFAULT_YES:TRUE
 
 .h1 HTML Parsing
 
 .h2 HISTORICAL_COMMENTS
 # If HISTORICAL_COMMENTS is TRUE, Lynx will revert to the "Historical"
 # behavior of treating any '>' as a terminator for comments, instead of
 # seeking a valid '-->' terminator (note that white space can be present
 # between the '--' and '>' in valid terminators).  The compilation default
 # is FALSE.
 #
 # The compilation default, or default defined here, can be toggled via a
 # "-historical" command line switch, and via the LYK_HISTORICAL command key.
 #
 #HISTORICAL_COMMENTS:FALSE
 
 .h2 MINIMAL_COMMENTS
 # If MINIMAL_COMMENTS is TRUE, Lynx will not use Valid comment parsing
 # of '--' pairs as serial comments within an overall comment element,
 # and instead will seek only a '-->' terminator for the overall comment
 # element.  This emulates the Netscape v2.0 comment parsing bug, and
 # will help Lynx cope with the use of dashes as "decorations", which
 # consequently has become common in so-called "Enhanced for Netscape"
 # pages.  Note that setting Historical comments on will override the
 # Minimal or Valid setting.
 #
 # The compilation default for MINIMAL_COMMENTS is FALSE, but we'll
 # set it TRUE here, until Netscape gets its comment parsing right,
 # and "decorative" dashes cease to be so common.
 #
 # The compilation default, or default defined here, can be toggled via a
 # "-minimal" command line switch, and via the LYK_MINIMAL command key.
 #
 MINIMAL_COMMENTS:TRUE
 
 .h2 SOFT_DQUOTES
 # If SOFT_DQUOTES is TRUE, Lynx will emulate the invalid behavior of
 # treating '>' as a co-terminator of a double-quoted attribute value
 # and the tag which contains it, as was done in old versions of Netscape
 # and Mosaic.  The compilation default is FALSE.
 #
 # The compilation default, or default defined here, can be toggled via
 # a "-soft_dquotes" command line switch.
 #
 #SOFT_DQUOTES:FALSE
 
 .h2 STRIP_DOTDOT_URLS
 # If STRIP_DOTDOT_URLS is TRUE, Lynx emulates the invalid behavior of many
 # browsers to strip a leading "../" segment from relative URLs in HTML
 # documents with a http or https base URL, if this would otherwise lead to
 # an absolute URLs with those characters still in it.  Such URLs are normally
 # erroneous and not what is intended by page authors.  Lynx will issue
 # a warning message when this occurs.
 #
 # If STRIP_DOTDOT_URLS is FALSE, Lynx will use those URLs for requests
 # without taking any special actions or issuing Warnings, in most cases
 # this will result in an error response from the server.
 #
 # Note that Lynx never tries to fix similar URLs for protocols other than
 # http and https, since they are less common and may actually be valid in
 # some cases.
 #
 #STRIP_DOTDOT_URLS:TRUE
 
 .h1 Appearance
 
 .h2 ENABLE_SCROLLBACK
 # If ENABLE_SCROLLBACK is TRUE, Lynx will clear the entire screen before
 # displaying each new screenful of text.  Though less efficient for normal
 # use, this allows programs that maintain a buffer of previously-displayed
 # text to recognize the continuity of what has been displayed, so that
 # previous screenfuls can be reviewed by whatever method the program uses
 # to scroll back through previous text.  For example, the PC comm program
 # QModem has a key that can be pressed to scroll back; if ENABLE_SCROLLBACK
 # is TRUE, pressing the scrollback key will access previous screenfuls which
 # will have been stored on the local PC and will therefore be displayed
 # instantaneously, instead of needing to be retransmitted by Lynx at the
 # speed of the comm connection (but Lynx will not know about the change,
 # so you must restore the last screen before resuming with Lynx commands).
 #
 # The default compilation or configuration setting can be toggled via an
 # "-enable_scrollback" command line switch.
 #
 #ENABLE_SCROLLBACK:FALSE
 
 .h2 SCAN_FOR_BURIED_NEWS_REFS
 # If SCAN_FOR_BURIED_NEWS_REFS is set to TRUE, Lynx will scan the bodies
 # of news articles for buried article and URL references and convert them
 # to links.  The compilation default is TRUE, but some email addresses
 # enclosed in angle brackets ("<user@address>") might be converted to false
 # news links, and uuencoded messages might be corrupted.  The conversion is
 # not done when the display is toggled to source or when 'd'ownloading, so
 # uuencoded articles can be saved intact regardless of these settings.
 #
 # The default setting can be toggled via a "-buried_news" command line
 # switch.
 #
 #SCAN_FOR_BURIED_NEWS_REFS:TRUE
 
 .h2 PREPEND_BASE_TO_SOURCE
 # If PREPEND_BASE_TO_SOURCE is set to FALSE, Lynx will not prepend a
 # Request URL comment and BASE element to text/html source files when
 # they are retrieved for 'd'ownloading or passed to 'p'rint functions.
 # The compilation default is TRUE.  Note that this prepending is not
 # done for -source dumps, unless the -base switch also was included on
 # the command line, and the latter switch overrides the setting of the
 # PREPEND_BASE_TO_SOURCE configuration variable.
 #
 #PREPEND_BASE_TO_SOURCE:TRUE
 
 .h1 External Programs
 # MIME types and viewers!
 #
 # file extensions may be assigned to MIME types using
 # the SUFFIX: definition.
 #
 # NOTE: It is normally preferable to define new extension mappings in
 #       EXTENSION_MAP files (see below) instead of here:  Definitions
 #       here are overridden by those in EXTENSION_MAP files and even by
 #       some built-in defaults in src/HTInit.c.  On the other hand,
 #       definitions here allow some more fields that are not possible
 #       in those files.
 #
 #       Extension mappings have an effect mostly for ftp and local files,
 #       they are NOT used to determine the type of content for URLs with
 #       the http protocol.  This is because HTTP servers already specify
 #       the MIME type in the Content-Type header.  [It may still be
 #       necessary to set up an appropriate suffix for some MIME types,
 #       even if they are accessed only via the HTTP protocol, if the viewer
 #       (see below) for those MIME types requires a certain suffix for the
 #       temporary file passed to it.]
 
 .h2 GLOBAL_EXTENSION_MAP
 .h2 PERSONAL_EXTENSION_MAP
 # The global and personal EXTENSION_MAP files allow you to assign extensions
 # to MIME types which will override any of the suffix maps in this (lynx.cfg)
 # configuration file, or in src/HTInit.c.  See the example mime.types file
 # in the samples subdirectory.
 #
 # Unix:
 # ====
 #GLOBAL_EXTENSION_MAP:/usr/local/lib/mosaic/mime.types
 # VMS:
 # ===
 #GLOBAL_EXTENSION_MAP:Lynx_Dir:mime.types
 #
 #	Unix (sought in user's home directory):
 #PERSONAL_EXTENSION_MAP:.mime.types
 #	VMS (sought in user's sys$login directory):
 #PERSONAL_EXTENSION_MAP:mime.types
 
 .h2 SUFFIX_ORDER
 # With SUFFIX_ORDER the precedence of suffix mappings can be changed.
 # Two kinds of settings are recognized:
 #
 #    PRECEDENCE_OTHER or PRECEDENCE_HERE
 #      Suffix mappings can come from four sources: (1) SUFFIX rules
 #      given here - see below, (2) built-in defaults (HTInit.c), and the
 #      (3) GLOBAL_EXTENSION_MAP and (4) PERSONAL_EXTENSION_MAP files.
 #      The order of precedence is normally as listed: (1) has the
 #      *lowest*, (4) has the *highest* precedence if there are conflicts.
 #      In other words, SUFFIX mappings here are overridden by conflicting
 #      ones elsewhere.  This default ordering is called PRECEDENCE_OTHER.
 #      With PRECEDENCE_HERE, the order becomes (2) (3) (4) (1), i.e.
 #      mappings here override others made elsewhere.
 #
 #    NO_BUILTIN
 #      This disables all built-in default rules.  In other words, (2) in the
 #      list above is skipped.  Some recognition for compressed files (".gz",
 #      ".Z") is still hardwired.   A mapping for some basic types, at least
 #      for text/html is probably necessary to get a usable configuration,
 #      it can be given in a SUFFIX rule below or an extension map file.
 # Both kinds of settings can be combined, separated by comma as in
 #        SUFFIX_ORDER:PRECEDENCE_HERE,NO_BUILTIN
 # Note: Using PRECEDENCE_HERE has only an effect on SUFFIX rules that follow.
 # Moreover, if GLOBAL_EXTENSION_MAP or PERSONAL_EXTENSION_MAP directives
 # are used, they should come *before* a SUFFIX_ORDER:PRECEDENCE_HERE.
 #
 #SUFFIX_ORDER:PRECEDENCE_OTHER
 
 .h2 SUFFIX
 # The SUFFIX definition takes the form of:
 #
 #    SUFFIX:<file extension>:<mime type>:<encoding>:<quality>:<description>
 #
 # All fields after <mime type> are optional (including the separators
 # if no more fields follow).
 #
 #     <file extension> trailing end of file name.  This need not strictly
 #                      be a file extension as understood by the OS, a dot
 #                      has to be given explicitly if it is indented, for
 #                      some uses one could even match full filenames here.
 #                      In addition, two forms are special: "*.*" and "*"
 #                      refer to the defaults for otherwise unmatched files
 #                      (the first for filenames with a dot somewhere in
 #                      the name, the second without), these are currently
 #                      mapped to text/plain in the (HTInit.c) built-in code.
 #                      Lynx compares the file-extensions ignoring case.
 #
 #     <mime type> a MIME content type.  It can also contain a charset
 #                 parameter, see example below.  This should be given in
 #                 all lowercase, use <description> for more fancy labels.
 #                 It can be left empty if an HTTP style encoding is given.
 #
 # Fields in addition to the usual ones are
 #
 #     <encoding>  either a mail style trivial encoding (7bit, 8bit, binary)
 #                 which could be used on some systems to determine how to
 #                 open local files (currently it isn't), and is used to
 #                 determine transfer mode for some FTP URLs; or a HTTP style
 #                 content encoding (gzip (equivalent to x-gzip), compress)
 #
 #     <quality> a floating point quality factor, usually between 0.0 and 1.0
 #               currently unused in most situations.
 #
 #     <description> text that can appear in FTP directory listings, and in
 #                   local directory listings (see LIST_FORMAT, code %t)
 #
 # For instance the following definition maps the
 # extension ".gif" to the mime type "image/gif"
 .ex
 #    SUFFIX:.gif:image/gif
 #
 # The following can be used if you have a convention to label
 # HTML files in some character set that differs from your local
 # default (see also ASSUME_LOCAL_CHARSET) with a different
 # extension, here ".html-u8".  It also demonstrates use of the
 # description field, note extra separators for omitted fields:
 .ex
 #    SUFFIX:.html-u8:text/html;charset=utf-8:::UTF-8 HTML
 #
 # The following shows how a suffix can indicate a combination
 # of MIME type and compression method. (The ending ".ps.gz" should
 # already be recognized by default; the form below could be used on
 # systems that don't allow more than one dot in filenames.)
 .ex
 #    SUFFIX:.ps_gz:application/postscript:gzip::gzip'd Postscript
 #
 # The following is meant to match a full filename (but can match
 # any file ending in "core", so be careful):
 .ex
 #    SUFFIX:core:application/x-core-file
 #
 # file suffixes are case INsensitive!
 #
 # The suffix definitions listed here in the default lynx.cfg file are
 # similar to those normally established via src/HTInit.c.  You can change
 # the defaults by editing that file or disable them, or via the global or
 # personal mime.types files at run time (except for the additional fields).
 # Assignments made here are overridden by entries in those files
 # unless preceded with a SUFFIX_ORDER:PRECEDENCE_HERE.
 #
 .ex 29
 #SUFFIX:.ps:application/postscript
 #SUFFIX:.eps:application/postscript
 #SUFFIX:.ai:application/postscript
 #SUFFIX:.rtf:application/rtf
 #SUFFIX:.snd:audio/basic
 #SUFFIX:.gif:image/gif
 #SUFFIX:.rgb:image/x-rgb
 #SUFFIX:.png:image/png
 #SUFFIX:.xbm:image/x-xbitmap
 #SUFFIX:.tiff:image/tiff
 #SUFFIX:.jpg:image/jpeg
 #SUFFIX:.jpeg:image/jpeg
 #SUFFIX:.mpg:video/mpeg
 #SUFFIX:.mpeg:video/mpeg
 #SUFFIX:.mov:video/quicktime
 #SUFFIX:.hqx:application/mac-binhex40
 #SUFFIX:.bin:application/octet-stream
 #SUFFIX:.exe:application/octet-stream
 #SUFFIX:.tar:application/x-tar
 #SUFFIX:.tgz:application/x-tar:gzip
 #SUFFIX:.Z::compress
 #SUFFIX:.gz::gzip
 #SUFFIX:.bz2:application/x-bzip2
 #SUFFIX:.zip:application/zip
 #SUFFIX:.lzh:application/x-lzh
 #SUFFIX:.lha:application/x-lha
 #SUFFIX:.dms:application/x-dms
 #SUFFIX:.html:text/html
 #SUFFIX:.txt:text/plain
 
 .h2 XLOADIMAGE_COMMAND
 # VMS:
 # ====
 # XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c
 # for viewing image content types when the DECW$DISPLAY logical
 # is set.  Make it the foreign command for your system's X image
 # viewer (commonly, "xv").  It can be anything that will handle GIF,
 # TIFF and other popular image formats.  Freeware ports of xv for
 # VMS were available in the ftp://ftp.wku.edu/vms/unsupported and
 # http://www.openvms.digital.com/cd/XV310A/ subdirectories.  You
 # must also have a "%s" for the filename.  The default is defined
 # in userdefs.h and can be overridden here, or via the global or
 # personal mailcap files (see below).
 #
 # Make this empty (but not commented out) if you don't have such a viewer or
 # want to disable the built-in default viewer mappings for image types.
 #
 #XLOADIMAGE_COMMAND:xv %s
 #
 # Unix:
 # =====
 # XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for
 # viewing image content types when the DISPLAY environment variable
 # is set.  Make it the full path and name of the xli (also know as
 # xloadimage or xview) command, or other image viewer.  It can be
 # anything that will handle GIF, TIFF and other popular image formats
 # (xli does).  The freeware distribution of xli is available in the
 # ftp://ftp.x.org/contrib subdirectory.  The shareware, xv, also is
 # suitable.  You must also have a "%s" for the filename; "&" for
 # background is optional.  The default is defined in userdefs.h and can be
 # overridden here, or via the global or personal mailcap files (see below).
 # Make this empty (but not commented out) if you don't have such a
 # viewer or don't want to disable the built-in default viewer
 # mappings for image types.
 # Note that open is used as the default for NeXT, instead of the
 # XLOADIMAGE_COMMAND definition.
 # If you use xli, you may want to add the -quiet flag.
 #
 #XLOADIMAGE_COMMAND:xli %s &
 
 .h2 VIEWER
 # MIME types may be assigned to external viewers using
 # the VIEWER definition.
 #
 # NOTE: if you do not define a viewer to a new MIME type
 #       that you assigned above then it will be saved to
 #       disk by default.
 #       It is normally preferable to define new viewers in
 #       MAILCAP files (see below) instead of here:  Definitions
 #       here are overridden by those in MAILCAP files and even
 #       by some built-in defaults in src/HTInit.c.
 #
 # The VIEWER definition takes the form of:
 #    VIEWER:<mime type>:<viewer command>[:<environment>]
 #      where -mime type is the MIME content type of the file
 #	     -viewer command is a system command that can be
 #             used to display the file where %s is replaced
 #             within the command with the physical filename
 #             (e.g., "ghostview %s" becomes "ghostview /tmp/temppsfile")
 #            -environment is optional.  The only valid keywords
 #             are currently XWINDOWS and NON_XWINDOWS.  If the XWINDOWS
 #             environment is specified then the viewer will only be
 #             defined when the user has the environment variable DISPLAY
 #             (DECW$DISPLAY on VMS) defined.  If the NON_XWINDOWS environment
 #             is specified the specified viewer will only be defined when the
 #             user DOES NOT have the environment variable DISPLAY defined.
 #  examples:
 #		VIEWER:image/gif:xli %s:XWINDOWS
 #               VIEWER:image/gif:ascii-view %s:NON_XWINDOWS
 #               VIEWER:application/start-elm:elm
 #
 # You must put the whole definition on one line.
 #
 # If you must use a colon in the viewer command, precede it with a backslash!
 #
 # The MIME_type:viewer:XWINDOWS definitions listed here in the lynx.cfg
 # file are among those established via src/HTInit.c.  For the image types,
 # HTInit.c uses the XLOADIMAGE_COMMAND definition in userdefs.h or above
 # (open is used for NeXT).  You can change any of these defaults via the
 # global or personal mailcap files.  Assignments made here will be overridden
 # by entries in those files.
 #
 .ex 7
 #VIEWER:application/postscript:ghostview %s&:XWINDOWS
 #VIEWER:image/gif:xli %s&:XWINDOWS
 #VIEWER:image/x-xbm:xli %s&:XWINDOWS
 #VIEWER:image/png:xli %s&:XWINDOWS
 #VIEWER:image/tiff:xli %s&:XWINDOWS
 #VIEWER:image/jpeg:xli %s&:XWINDOWS
 #VIEWER:video/mpeg:mpeg_play %s &:XWINDOWS
 
 .h2 GLOBAL_MAILCAP
 .h2 PERSONAL_MAILCAP
 # The global and personal MAILCAP files allow you to specify external
 # viewers to be spawned when Lynx encounters different MIME types, which
 # will override any of the suffix maps in this (lynx.cfg) configuration
 # file, or in src/HTInit.c.  See
 .url http://tools.ietf.org/html/rfc1524
 # and the example mailcap file in the samples subdirectory.
 #
 # Unix:
 # ====
 #GLOBAL_MAILCAP:/usr/local/lib/mosaic/mailcap
 # VMS:
 # ===
 #GLOBAL_MAILCAP:Lynx_Dir:mailcap
 #
 #	Sought in user's home (Unix) or sys$login (VMS) directory.
 #PERSONAL_MAILCAP:.mailcap
 
 .h2 PREFERRED_MEDIA_TYPES
 # When doing a GET, lynx lists the MIME types which it knows how to present
 # (the "Accept:" string).  Depending on your system configuration, the
 # mime.types or other data given by the GLOBAL_EXTENSION_MAP may include many
 # entries that lynx really does not handle.  Use this option to select one
 # of the built-in subsets of the MIME types that lynx could list in the
 # Accept.
 #
 # Values for this option are keywords:
 #	INTERNAL	lynx's built-in types for internal conversions
 #	CONFIGFILE	adds lynx.cfg
 #	USER		adds PERSONAL_EXTENSION_MAP settings
 #	SYSTEM		adds GLOBAL_EXTENSION_MAP  settings
 #	ALL		adds lynx's built-in types for external conversions
 #
 #PREFERRED_MEDIA_TYPES:internal
 
 .h2 PREFERRED_ENCODING
 # When doing a GET, lynx tells what types of compressed data it can decompress
 # (the "Accept-Encoding:" string).  This is determined by compiled-in support
 # for decompression or external decompression programs.
 #
 # Values for this option are keywords:
 #	NONE		Do not request compressed data
 #	GZIP		For gzip
 #	COMPRESS	For compress
 #	BZIP2		For bzip2
 #	ALL		All of the above.
 #PREFERRED_ENCODING:all
 
 .h2 PREFERRED_CONTENT_TYPE
 # When doing a GET, lynx expects the server to provide a Content-Type, i.e.,
 # the MIME name which tells it how to present data.  When that is missing
 # lynx uses this value.
 #PREFERRED_CONTENT_TYPE: text/plain
 
 .h1 Keyboard Input
 
 .h2 KEYBOARD_LAYOUT
 # If your terminal (or terminal emulator, or operating system) does not
 # support 8-bit input (at all or in easy way), you can use Lynx to
 # generate 8-bit characters from 7-bit ones output by terminal.
 #
 # Currently available keyboard layouts:
 #	ROT13'd keyboard layout
 #	JCUKEN Cyrillic, for AT 101-key kbd
 #	YAWERTY Cyrillic, for DEC LK201 kbd
 #
 # This feature is ifdef'd with EXP_KEYBOARD_LAYOUT.
 #KEYBOARD_LAYOUT:JCUKEN Cyrillic, for AT 101-key kbd
 
 .h2 KEYMAP
 # Key remapping definitions!
 #
 # You may redefine the keymapping of any function in Lynx by
 # using the KEYMAP option.  The basic form of KEYMAP is:
 #  KEYMAP:<KEYSTROKE>:<LYNX FUNCTION>
 # (See below for an extended format.)
 #
 # You must map upper and lowercase keys separately.
 #
 # A representative list of functions mapped to their default keys is
 # provided below.  All of the mappings are commented out by default
 # since they just repeat the default mappings, except for TOGGLE_HELP
 # (see below).  See LYKeymap.c for the complete key mapping.  Use the
 # 'K'eymap command when running Lynx for a list of the _current_ keymappings.
 #
 # You can disable any of the default key-mappings by mapping the key to
 # "UNMAPPED".
 #
 # (However, in contrast to the output of 'K' command,
 # 'H'elp (lynx_help/*.html and lynx_help/keystrokes/*.html files) shows
 # the default mapping unless you change that files manually,
 # so you are responsible for possible deviations
 # when you are changing any KEYMAP below).
 #
 # Lynx accepts special keys either by name, or by lynx-specific codes.  These
 # names and codes are listed below, with a brief description:
 .nf
 #         UPARROW: 0x100 (Up Arrow)
 #         DNARROW: 0x101 (Down Arrow)
 #         RTARROW: 0x102 (Right Arrow)
 #         LTARROW: 0x103 (Left Arrow)
 #          PGDOWN: 0x104 (Page Down)
 #            PGUP: 0x105 (Page Up)
 #            HOME: 0x106 (Keypad Home)
 #             END: 0x107 (Keypad End)
 #              F1: 0x108 (VT220 Function-key 1, also Help Key)
 #          DO_KEY: 0x109 (VT220 Function key 16, also "Do" Key)
 #        FIND_KEY: 0x10A (VT220 key with label "Home" may be treated as Find)
 #      SELECT_KEY: 0x10B (VT220 key with label "End" may be treated as Select)
 #      INSERT_KEY: 0x10C (VT220 Insert Key)
 #      REMOVE_KEY: 0x10D (VT220 Remove (DEL) Key)
 #      DO_NOTHING: 0x10E (reserved for internal use, DO_NOTHING)
 #     BACKTAB_KEY: 0x10F (Back Tab, e.g., using Shift)
 #              F2: 0x110 (VT220 Function-key 2)
 #              F3: 0x111 (VT220 Function-key 3)
 #              F4: 0x112 (VT220 Function-key 4)
 #              F5: 0x113 (VT220 Function-key 5)
 #              F6: 0x114 (VT220 Function-key 6)
 #              F7: 0x115 (VT220 Function-key 7)
 #              F8: 0x116 (VT220 Function-key 8)
 #              F9: 0x117 (VT220 Function-key 9)
 #             F10: 0x118 (VT220 Function-key 10)
 #             F11: 0x119 (VT220 Function-key 11)
 #             F12: 0x11A (VT220 Function-key 12)
 #           MOUSE: 0x11D (reserved for internal use with -use_mouse)
 .fi
 # Other codes not listed above may be available for additional keys,
 # depending on operating system and libraries used to compile Lynx.
 # On Unix-like systems, if compiled with slang or ncurses, an additional
 # level of key mapping is supported via an external ".lynx-keymaps" file.
 # This file, if found in the home directory at startup, will always be
 # used under those conditions; see lynx-keymaps distributed in the samples
 # subdirectory for further explanation.  Note that mapping via
 # .lynx-keymaps, if applicable, is a step that logically comes before the
 # mappings done here: KEYMAP maps the result of that step (which still
 # represents a key) to a function (which represents an action that Lynx
 # should perform).
 .nf
 #
 #KEYMAP:0x5C:SOURCE		# Toggle source viewing mode (show HTML source)
 #KEYMAP:^R:RELOAD		# Reload the current document and redisplay
 #KEYMAP:^U:NEXT_DOC		# Undo PREV_DOC)
 #KEYMAP:q:QUIT			# Ask the user to quit
 #KEYMAP:Q:ABORT			# Quit without verification
 #KEYMAP:0x20:NEXT_PAGE		# Move down to next page
 #KEYMAP:-:PREV_PAGE		# Move up to previous page
 #KEYMAP:^P:UP_TWO		# Move display up two lines
 #KEYMAP:INSERT_KEY:UP_TWO	# Function key Insert - Move display up two lines
 #KEYMAP:^N:DOWN_TWO		# Move display down two lines
 #KEYMAP:REMOVE_KEY:DOWN_TWO	# Function key Remove - Move display down two lines
 #KEYMAP:(:UP_HALF		# Move display up half a page
 #KEYMAP:):DOWN_HALF		# Move display down half a page
 #KEYMAP:^W:REFRESH		# Refresh the screen
 #KEYMAP:^A:HOME			# Go to top of current document
 #KEYMAP:HOME:HOME		# Keypad Home - Go to top of current document
 #KEYMAP:FIND_KEY:HOME		# Function key Find - Go to top of current document
 #KEYMAP:^E:END			# Go to bottom of current document
 #KEYMAP:END:END			# Keypad End - Go to bottom of current document
 #KEYMAP:SELECT_KEY:END		# Function key Select - Go to bottom of current document
 #KEYMAP:UPARROW:PREV_LINK	# Move to the previous link or page
 #KEYMAP:DNARROW:NEXT_LINK	# Move to the next link or page
 #KEYMAP:BACKTAB_KEY:FASTBACKW_LINK	# Back Tab - Move to previous link or text area
 #KEYMAP:^I:FASTFORW_LINK	# Tab key - Move always to next link or text area
 #KEYMAP:^:FIRST_LINK		# Move to the first link on line
 #KEYMAP:$:LAST_LINK		# Move to the last link on line
 #KEYMAP:<:UP_LINK		# Move to the link above
 #KEYMAP:>:DOWN_LINK		# Move to the link below
 #KEYMAP:0x7F:HISTORY		# Show the history list
 #KEYMAP:0x08:HISTORY		# Show the history list
 #KEYMAP:LTARROW:PREV_DOC	# Return to the previous document in history stack
 #KEYMAP:RTARROW:ACTIVATE	# Select the current link
 #KEYMAP:DO_KEY:ACTIVATE		# Function key Do - Select the current link
 #KEYMAP:g:GOTO			# Goto a random URL
 #KEYMAP:G:ECGOTO		# Edit the current document's URL and go to it
 #KEYMAP:H:HELP			# Show default help screen
 #KEYMAP:F1:DWIMHELP		# Function key Help - Show a help screen
 #KEYMAP:i:INDEX			# Show default index
 #*** Edit FORM_LINK_* messages in LYMessages_en.h if you change NOCACHE ***
 #KEYMAP:x:NOCACHE		# Force submission of form or link with no-cache
 #*** Do not change INTERRUPT from 'z' & 'Z' ***
 #KEYMAP:z:INTERRUPT		# Interrupt network transmission
 #KEYMAP:m:MAIN_MENU		# Return to the main menu
 #KEYMAP:o:OPTIONS		# Show the options menu
 #KEYMAP:i:INDEX_SEARCH		# Search a server based index
 #KEYMAP:/:WHEREIS		# Find a string within the current document
 #KEYMAP:n:NEXT			# Find next occurrence of string within document
 #KEYMAP:c:COMMENT		# Comment to the author of the current document
 #KEYMAP:C:CHDIR			# Change current directory
 #KEYMAP:e:EDIT			# Edit current document or form's textarea (call: ^Ve)
 #KEYMAP:E:ELGOTO		# Edit the current link's URL or ACTION and go to it
 #KEYMAP:=:INFO			# Show info about current document
 #KEYMAP:p:PRINT			# Show print options
 #KEYMAP:a:ADD_BOOKMARK		# Add current document to bookmark list
 #KEYMAP:v:VIEW_BOOKMARK		# View the bookmark list
 #KEYMAP:V:VLINKS		# List links visited during the current Lynx session
 #KEYMAP:!:SHELL			# Spawn default shell
 #KEYMAP:d:DOWNLOAD		# Download current link
 #KEYMAP:j:JUMP			# Jump to a predefined target
 #KEYMAP:k:KEYMAP		# Display the current key map
 #KEYMAP:l:LIST			# List the references (links) in the current document
 #KEYMAP:#:TOOLBAR		# Go to the Toolbar or Banner in the current document
 #KEYMAP:^T:TRACE_TOGGLE		# Toggle detailed tracing for debugging
 #KEYMAP:;:TRACE_LOG		# View trace log if available for the current session
 #KEYMAP:*:IMAGE_TOGGLE		# Toggle inclusion of links for all images
 #KEYMAP:[:INLINE_TOGGLE		# Toggle pseudo-ALTs for inlines with no ALT string
 #KEYMAP:]:HEAD			# Send a HEAD request for current document or link
 #*** Must be compiled with USE_EXTERNALS to enable EXTERN_LINK, EXTERN_PAGE ***
 #KEYMAP:,:EXTERN_PAGE		# Run external program with current page
 #KEYMAP:.:EXTERN_LINK		# Run external program with current link
 #*** Escaping from text input fields with ^V is independent from this: ***
 #KEYMAP:^V:SWITCH_DTD		# Toggle between SortaSGML and TagSoup HTML parsing
 #KEYMAP:0x00:DO_NOTHING		# Does nothing (ignore this key)
 #KEYMAP:DO_NOTHING:DO_NOTHING	# Does nothing (ignore this key)
 #KEYMAP:{:SHIFT_LEFT		# shift the screen left
 #KEYMAP:}:SHIFT_RIGHT		# shift the screen right
 #KEYMAP:|:LINEWRAP_TOGGLE	# toggle linewrap on/off, for shift-commands
 #KEYMAP:~:NESTED_TABLES		# toggle nested-tables parsing on/off
 .fi
 # In addition to the bindings available by default, the following functions
 # are not directly mapped to any keys by default, although some of them may
 # be mapped in specific line-editor bindings (effective while in text input
 # fields):
 .nf
 #
 #KEYMAP:???:RIGHT_LINK		# Move to the link to the right
 #KEYMAP:???:LEFT_LINK		# Move to the link to the left
 #KEYMAP:???:LPOS_PREV_LINK	# Like PREV_LINK, last column pos if form input
 #KEYMAP:???:LPOS_NEXT_LINK	# Like NEXT_LINK, last column pos if form input
 #*** Only useful in form text fields , need PASS or prefixing with ^V: ***
 #KEYMAP:???:DWIMHELP		# Display help page that may depend on context
 #KEYMAP:???:DWIMEDIT		# Use external editor for context-dependent purpose
 #*** Only useful in a form textarea, need PASS or prefixing with ^V: ***
 #KEYMAP:???:EDITTEXTAREA	# use external editor to edit a form textarea
 #KEYMAP:???:GROWTEXTAREA	# Add some blank lines to bottom of textarea
 #KEYMAP:???:INSERTFILE		# Insert file into a textarea (just above cursor)
 #*** Only useful with dired support and OK_INSTALL: ***
 #KEYMAP:???:INSTALL		# install (i.e. copy) local files to new location
 .fi
 #
 # If TOGGLE_HELP is mapped, in novice mode the second help menu line
 # can be toggled among NOVICE_LINE_TWO_A, _B, and _C, as defined in
 # LYMessages_en.h  Otherwise, it will be NOVICE_LINE_TWO.
 #
 #KEYMAP:O:TOGGLE_HELP		# Show other commands in the novice help menu
 #
 # KEYMAP lines can have one or two additional fields.  The extended format is
 #  KEYMAP:<KEYSTROKE>:[<MAIN LYNX FUNCTION>]:<OTHER BINDING>[:<SELECT>]
 #
 # If the additional field OTHER BINDING specifies DIRED, then the function is
 # mapped in the override table used only in DIRED mode.  This is only valid
 # if lynx was compiled with dired support and OK_OVERRIDE defined.  A
 # MAIN LYNX FUNCTION must be given (it should of course be one that makes
 # sense in Dired mode), and SELECT is meaningless.  Default built-in override
 # mappings are
 #
 #KEYMAP:^U:NEXT_DOC:DIRED	# Undo going back to the previous document
 #KEYMAP:.:TAG_LINK:DIRED	# Tag a file or directory for later action
 #KEYMAP:c:CREATE:DIRED		# Create a new file or directory
 #KEYMAP:C:CHDIR:DIRED		# change current directory
 #KEYMAP:f:DIRED_MENU:DIRED	# Display a menu of file operations
 #KEYMAP:m:MODIFY:DIRED		# Modify name or location of a file or directory
 #KEYMAP:r:REMOVE:DIRED		# Remove files or directories
 #KEYMAP:t:TAG_LINK:DIRED	# Tag a file or directory for later action
 #KEYMAP:u:UPLOAD:DIRED		# Show menu of "Upload Options"
 #
 # If the OTHER BINDING field does not specify DIRED, then it is taken as a
 # line-editor action.  It is possible to keep the MAIN LYNX FUNCTION field
 # empty in that case, for changing only the line-editing behavior.
 # If alternative line edit styles are compiled in, and modifying a key's
 # line-editor binding on a per style basis is possible, then SELECT can be
 # used to specify which styles are affected.  By default, or if SELECT is
 # 0, all line edit styles are affected.  If SELECT is a positive integer
 # number, only the binding for the numbered style is changed (numbering
 # is in the order in which styles are shown in the Options Menu, starting
 # with 1 for the Default style).  If SELECT is negative (-n), all styles
 # except n are affected.
 .nf
 #
 #  NOP		# Do Nothing
 #  ABORT	# Input cancelled
 #
 #  BOL		# Go to begin of line
 #  EOL		# Go to end   of line
 #  FORW		# Cursor forwards
 #  FORW_RL	# Cursor forwards or right link
 #  BACK		# Cursor backwards
 #  FORWW	# Word forward
 #  BACKW	# Word back
 #  BACK_LL	# Cursor backwards or left link
 #
 #  DELN		# Delete next/curr char
 #  DELP		# Delete prev      char
 #  DELNW	# Delete next word
 #  DELPW	# Delete prev word
 #  DELBL	# Delete back to BOL
 #  DELEL	# Delete thru EOL
 #  ERASE	# Erase the line
 #  LOWER	# Lower case the line
 #  UPPER	# Upper case the line
 #
 #  LKCMD	# In fields: Invoke key command prompt (default for ^V)
 #  PASS		# In fields: handle as non-lineedit key; in prompts: ignore
 #
 .fi
 # Modify following key (prefixing only works within line-editing, edit actions
 # of some resulting prefixed keys are built-in, see Line Editor help pages)
 #  SETM1	# Set modifier 1 flag (default for ^X - key prefix)
 #  SETM2	# Set modifier 2 flag (another key prefix - same effect)
 #
 # May not always be compiled in:
 .nf
 #
 #  TPOS		# Transpose characters
 #  SETMARK	# emacs-like set-mark-command
 #  XPMARK	# emacs-like exchange-point-and-mark
 #  KILLREG	# emacs-like kill-region
 #  YANK		# emacs-like yank
 #  SWMAP	# Switch input keymap
 #  PASTE	# ClipBoard to Lynx - Windows Extension
 #
 .fi
 # May work differently from expected if not bound to their expected keys:
 .nf
 #
 #  CHAR		# Insert printable char (default for all ASCII printable)
 #  ENTER	# Input complete, return char/lynxkeycode (for RETURN/ENTER)
 #  TAB		# Input complete, return TAB (for ASCII TAB char ^I)
 #
 .fi
 # Internal use, probably not useful for binding, listed for completeness:
 .nf
 #
 #  UNMOD	# Fall back to no-modifier command
 #  AIX		# Hex 97
 #  C1CHAR	# Insert C1 char if printable
 #
 .fi
 # If OTHER BINDING specifies PASS, then if the key is pressed in a text input
 # field it is passed by the built-in line-editor to normal KEYMAP handling,
 # i.e. this flag acts like an implied ^V escape (always overrides line-editor
 # behavior of the key).  For example,
 #KEYMAP:INSERT_KEY:UP_TWO:PASS # Function key Insert - Move display up two lines
 #
 # Other examples (repeating built-in bindings)
 #KEYMAP:^V::LKCMD	# set (only) line-edit action for ^V
 #KEYMAP:^V:SWITCH_DTD:LKCMD # set main lynxaction and line-edit action for ^V
 #KEYMAP:^U::ERASE:1	# set line-edit binding for ^U, for default style
 #KEYMAP:^[::SETM2:3	# use escape key as modifier - works only sometimes
 
 .h1 External Programs
 # These settings control the ability of Lynx to invoke various programs for
 # the user.
 
 .h2 CSWING_PATH
 # VMS ONLY:
 #==========
 # On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for
 # use as the Directory/File Manager (sources, objects, or executables were
 # available from ftp://narnia.memst.edu/).  CSWING_PATH should be defined
 # here or in userdefs.h to your foreign command for CSwing, with any
 # regulatory switches you want included.  If not defined, or defined as
 # a zero-length string ("") or "none" (case-insensitive), the support
 # will be disabled.  It will also be disabled if the -nobrowse or
 # -selective switches are used, or if the file_url restriction is set.
 #
 # When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke
 # CSwing, normally with the current default directory as an argument to
 # position the user on that node of the directory tree.  However, if the
 # current document is a local directory listing, or a local file and not
 # one of the temporary menu or list files, the associated directory will
 # be passed as an argument, to position the user on that node of the tree.
 #
 #CSWING_PATH:swing
 
 .h1 Internal Behavior
 
 .h2 AUTO_UNCACHE_DIRLISTS
 # AUTO_UNCACHE_DIRLISTS determines when local file directory listings are
 # automatically regenerated (by re-reading the actual directory from disk).
 # Set the value to 0 to avoid automatic regeneration in most cases.  This is
 # useful for browsing large directories that take some time to read and format.
 # An update can still always be forced with the RELOAD key, and specific DIRED
 # actions may cause a refresh anyway.  Set the value to 1 to force regeneration
 # after commands that usually change the directory or some files and would make
 # the displayed info stale, like EDIT and REMOVE.  Set it to 2 (the default) or
 # greater to force regeneration even after leaving the displayed directory
 # listing by some action that usually causes no change, like GOTO or entering a
 # file with the ACTIVATE key.  This option is only honored in DIRED mode (i.e.
 # when lynx is compiled with DIRED_SUPPORT and it is not disabled with a
 # -restriction).  Local directories displayed without DIRED normally act as if
 # AUTO_UNCACHE_DIRLISTS:0 was in effect.
 #
 #AUTO_UNCACHE_DIRLISTS:2
 
 .h1 Appearance
 
 .h2 LIST_FORMAT
 # LIST_FORMAT defines the display for local files when Lynx has been
 # compiled with LONG_LIST defined in the Makefile.  The default is set
 # in userdefs.h, normally to "ls -l" format, and can be changed here
 # by uncommenting the indicated lines, or adding a definition with a
 # modified parameter list.
 #
 # This feature is not available for VMS.
 #
 # The percent items in the list are interpreted as follows:
 .nf
 #
 #	%p	Unix-style permission bits
 #	%l	link count
 #	%o	owner of file
 #	%g	group of file
 #	%d	date of last modification
 #	%a	anchor pointing to file or directory
 #	%A	as above but don't show symbolic links
 #	%t	type of file (description derived from MIME type)
 #	%T	MIME type as known by Lynx (from mime.types or default)
 #	%k	size of file in Kilobytes
 #	%K	as above but omit size for directories
 #	%s	size of file in bytes
 #
 .fi
 # Anything between the percent and the letter is passed on to sprintf.
 # A double percent yields a literal percent on output.  Other characters
 # are passed through literally.
 #
 # If you want only the filename:
 #
 .ex
 #LIST_FORMAT:    %a
 #
 # If you want a brief output:
 #
 .ex
 #LIST_FORMAT:   %4K %-12.12d %a
 #
 # If you want the Unix "ls -l" format:
 #
 .ex
 #LIST_FORMAT:    %p %4l %-8.8o %-8.8g %7s %-12.12d %a
 
 .h1 External Programs
 
 .h2 DIRED_MENU
 # Unix ONLY:
 #===========
 # DIRED_MENU items are used to compose the F)ull menu list in DIRED mode
 # The behavior of the default configuration given here is much the same
 # as it was when this menu was hard-coded but these items can now be adjusted
 # to suit local needs.  In particular, many of the LYNXDIRED actions can be
 # replaced with lynxexec, lynxprog and lynxcgi script references.
 #
 # NOTE that defining even one DIRED_MENU line overrides all the built-in
 # definitions, so a complete set must then be defined here.
 #
 # Each line consists of the following fields:
 .nf
 #
 #	DIRED_MENU:type:suffix:link text:extra text:action
 #
 #	type: TAG:   list only when one or more files are tagged
 #	      FILE:  list only when the current selection is a regular file
 #	      DIR:   list only when the current selection is a directory
 #	      LINK:  list only when the current selection is a symbolic link
 #
 #	suffix:  list only if the current selection ends in this pattern
 #
 #	link text:  the displayed text of the link
 #
 #	extra text:  the text displayed following the link
 #
 #	action:  the URL to be followed upon selection
 #
 #	link text and action are scanned for % sequences that are expanded
 #	at display time as follows:
 #
 #		%p  path of current selection
 #		%f  filename (last component) of current selection
 #		%t  tagged list (full paths)
 #		%l  list of tagged file names
 #		%d  the current directory
 #
 .fi
 #DIRED_MENU:::New File:(in current directory):LYNXDIRED://NEW_FILE%d
 #DIRED_MENU:::New Directory:(in current directory):LYNXDIRED://NEW_FOLDER%d
 #
 # Following depends on OK_INSTALL
 #DIRED_MENU:FILE::Install:selected file to new location:LYNXDIRED://INSTALL_SRC%p
 #DIRED_MENU:DIR::Install:selected directory to new location:LYNXDIRED://INSTALL_SRC%p
 #
 #DIRED_MENU:FILE::Modify File Name:(of current selection):LYNXDIRED://MODIFY_NAME%p
 #DIRED_MENU:DIR::Modify Directory Name:(of current selection):LYNXDIRED://MODIFY_NAME%p
 #DIRED_MENU:LINK::Modify Name:(of selected symbolic link):LYNXDIRED://MODIFY_NAME%p
 #
 # Following depends on OK_PERMIT
 #DIRED_MENU:FILE::Modify File Permissions:(of current selection):LYNXDIRED://PERMIT_SRC%p
 #DIRED_MENU:DIR::Modify Directory Permissions:(of current selection):LYNXDIRED://PERMIT_SRC%p
 #
 #DIRED_MENU:FILE::Change Location:(of selected file):LYNXDIRED://MODIFY_LOCATION%p
 #DIRED_MENU:DIR::Change Location:(of selected directory):LYNXDIRED://MODIFY_LOCATION%p
 #DIRED_MENU:LINK::Change Location:(of selected symbolic link):LYNXDIRED://MODIFY_LOCATION%p
 #DIRED_MENU:FILE::Remove File:(current selection):LYNXDIRED://REMOVE_SINGLE%p
 #DIRED_MENU:DIR::Remove Directory:(current selection):LYNXDIRED://REMOVE_SINGLE%p
 #DIRED_MENU:LINK::Remove Symbolic Link:(current selection):LYNXDIRED://REMOVE_SINGLE%p
 #
 # Following depends on OK_UUDECODE and !ARCHIVE_ONLY
 #DIRED_MENU:FILE::UUDecode:(current selection):LYNXDIRED://UUDECODE%p
 #
 # Following depends on OK_TAR and !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.tar.Z:Expand:(current selection):LYNXDIRED://UNTAR_Z%p
 #
 # Following depend on OK_TAR and OK_GZIP and !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.tar.gz:Expand:(current selection):LYNXDIRED://UNTAR_GZ%p
 #DIRED_MENU:FILE:.tgz:Expand:(current selection):LYNXDIRED://UNTAR_GZ%p
 #
 # Following depends on !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.Z:Uncompress:(current selection):LYNXDIRED://DECOMPRESS%p
 #
 # Following depends on OK_GZIP and !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.gz:Uncompress:(current selection):LYNXDIRED://UNGZIP%p
 #
 # Following depends on OK_ZIP and !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.zip:Uncompress:(current selection):LYNXDIRED://UNZIP%p
 #
 # Following depends on OK_TAR and !ARCHIVE_ONLY
 #DIRED_MENU:FILE:.tar:UnTar:(current selection):LYNXDIRED://UNTAR%p
 #
 # Following depends on OK_TAR
 #DIRED_MENU:DIR::Tar:(current selection):LYNXDIRED://TAR%p
 #
 # Following depends on OK_TAR and OK_GZIP
 #DIRED_MENU:DIR::Tar and compress:(using GNU gzip):LYNXDIRED://TAR_GZ%p
 #
 # Following depends on OK_ZIP
 #DIRED_MENU:DIR::Package and compress:(using zip):LYNXDIRED://ZIP%p
 #
 #DIRED_MENU:FILE::Compress:(using Unix compress):LYNXDIRED://COMPRESS%p
 #
 # Following depends on OK_GZIP
 #DIRED_MENU:FILE::Compress:(using gzip):LYNXDIRED://GZIP%p
 #
 # Following depends on OK_ZIP
 #DIRED_MENU:FILE::Compress:(using zip):LYNXDIRED://ZIP%p
 #
 #DIRED_MENU:TAG::Move all tagged items to another location.::LYNXDIRED://MOVE_TAGGED%d
 #
 # Following depends on OK_INSTALL
 #DIRED_MENU:TAG::Install tagged files into another directory.::LYNXDIRED://INSTALL_SRC%00
 #
 #DIRED_MENU:TAG::Remove all tagged files and directories.::LYNXDIRED://REMOVE_TAGGED
 #DIRED_MENU:TAG::Untag all tagged items.::LYNXDIRED://CLEAR_TAGGED
 
 .h1 Internal Behavior
 
 .h2 NONRESTARTING_SIGWINCH
 # Some systems only:
 #===================
 # Lynx tries to detect window size changes with a signal handler for
 # SIGWINCH if supported.  If NONRESTARTING_SIGWINCH is set to TRUE,
 # and the sigaction interface is available on the system, the handler
 # is installed as 'non-restarting'.  On some systems (depending on the
 # library used for handling keyboard input, e.g. ncurses), this allows
 # more immediate notification of window size change events.  If the value
 # is set to FALSE, the signal() interface is used; this normally makes
 # the handler 'restarting', with the effect that lynx can react to size
 # changes only after some key is pressed.  The value can also be set to
 # XWINDOWS; this is equivalent to TRUE when the user has the environment
 # variable DISPLAY defined *at program start*, and equivalent to FALSE
 # otherwise.  The non-restarting behavior can also be changed to TRUE
 # or FALSE with the -nonrestarting_sigwinch switch, which overrides the
 # value in this file.
 #
 # Note that Lynx never re-parses document text purely as a result of a
 # window size change, so text lines may appear truncated after narrowing
 # the window, until the document is reloaded with ^R or a similar key
 # or until a different text is loaded.
 #
 # The default is FALSE since there is a possibility that non-restarting
 # interrupts may be mis-interpreted as fatal input errors in some
 # configurations (leading to an abrupt program exit), and since this
 # option is useful mostly only for users running Lynx under xterm or a
 # similar X terminal emulator.  On systems where the preconditions don't
 # apply this option is ignored.
 #
 #NONRESTARTING_SIGWINCH:FALSE
 
 .h2 NO_FORCED_CORE_DUMP
 # Unix ONLY:
 #===========
 # If NO_FORCED_CORE_DUMP is set to TRUE, Lynx will not force
 # core dumps via abort() calls on fatal errors or assert()
 # calls to check potentially fatal errors.  The compilation
 # default normally is FALSE, and can be changed here.  The
 # compilation or configuration default can be toggled via
 # the -core command line switch.
 # Note that this setting cannot be used to prevent core dumps
 # with certainty.  If this is important, means provided by the
 # operating system or kernel should be used.
 #
 #NO_FORCED_CORE_DUMP:FALSE
 
 .h1 Appearance
 
 .h2 COLOR
 # COLORS are only available if compiled with SVr4 curses or slang.  This is
 # the old color configuration.  The COLOR_STYLE configuration is compiled-in
 # and can simulate this if the ".lss" filename is empty.
 #
 # The line must be of the form:
 #
 # COLOR:Integer:Foreground:Background
 .nf
 #
 # The Integer value is interpreted as follows:
 #   0 - normal                      - normal text
 #   1 - bold                        - hyperlinks, see also BOLD_* options above
 #   2 - reverse                     - statusline
 #   3 - bold + reverse              (not used)
 #   4 - underline                   - text emphasis (EM, I, B tags etc.)
 #   5 - bold + underline            - hyperlinks within text emphasis
 #   6 - reverse + underline         - currently selected hyperlink
 #   7 - reverse + underline + bold  - WHEREIS search hits
 #
 # Each Foreground and Background value must be one of:
 #   black         red            green         brown
 #   blue          magenta        cyan          lightgray
 #   gray          brightred      brightgreen   yellow
 #   brightblue    brightmagenta  brightcyan    white
 .fi
 # or (if you have configured using -enable-default-colors with ncurses or
 # slang), "default" may be used for foreground and background.
 #
 # Note that in most cases a white background is really "lightgray", since
 # terminals generally do not implement bright backgrounds.
 #
 # Uncomment and change any of the compilation defaults.
 #
 #COLOR:0:black:white
 #COLOR:1:blue:white
 #COLOR:2:yellow:blue
 #COLOR:3:green:white
 #COLOR:4:magenta:white
 #COLOR:5:blue:white
 #COLOR:6:red:white
 COLOR:6:brightred:black
 #COLOR:7:magenta:cyan
 
 .h2 COLOR_STYLE
 # Also known as "lss" (lynx style-sheet), the color-style file assigns color
 # combination to tags and combinations of tags.  Normally a non-empty value
 # is compiled into lynx, and the user can override that using the -lss
 # command-line option.  The configure script allows one to compile in an
 # empty string.  If lynx finds no value for this setting, it simulates the
 # non-color-style assignments using the COLOR settings.
 #
 # If neither the command-line "-lss" or this COLOR_STYLE setting are given,
 # lynx tries the environment variables "LYNX_LSS" and "lynx_lss".  If neither
 # is set, lynx uses the first compiled-in value (which as noted, may be empty).
 #
 # At startup, lynx remembers the name of the color-style file which was used,
 # and together with each file specified, provides those as choices in the
 # O)ptions menu.
 #
 #COLOR_STYLE: lynx.lss
 #COLOR_STYLE: blue-background.lss
 #COLOR_STYLE: bright-blue.lss
 #COLOR_STYLE: midnight.lss
 #COLOR_STYLE: mild-colors.lss
 #COLOR_STYLE: opaque.lss
 
 .h2 NESTED_TABLES
 # This is an experimental feature for improving table layout.
 # It is enabled by default when the COLOR_STYLE configuration is used,
 # and false otherwise.
 #
 #NESTED_TABLES: true
 
 .h2 ASSUMED_COLOR
 # If built with a library that recognizes default colors (usually ncurses or
 # slang), and if the corresponding option is compiled into lynx, lynx
 # initializes it to assume the corresponding foreground and background colors.
 # Default colors are those that the terminal (emulator) itself is initialized
 # to.  For instance, you might have an xterm running with black text on a white
 # background, and want lynx to display colored text on the white background,
 # but leave the possibility of using the same configuration to draw colored
 # text on a different xterm, this time using its background set to black.
 #
 # If built with conventional SVr3/SVr4 curses, tells lynx to use color pair 0
 # when the given colors match this setting.  That gives a similar effect,
 # though not as flexible.  You will get the best results by setting the
 # terminal's default colors to match the prevailing text and background colors
 # that you have setup with lynx, and then alter the ASSUMED_COLOR setting to
 # match that.  If you do not alter the ASSUMED_COLOR setting, curses assumes
 # color pair 0's background is black, which implies that its foreground (text)
 # is white.
 #
 # The first value given is the foreground, the second is the background.
 #ASSUMED_COLOR:default:default
 
 .h2 DEFAULT_COLORS
 # If built with a library that recognizes default colors (usually ncurses or
 # slang), and if the corresponding option is compiled into lynx, lynx
 # initializes it to assume the corresponding foreground and background colors.
 # Default colors are those that the terminal (emulator) itself is initialized
 # to.
 #
 # Use this feature to disable the default-colors feature at runtime.
 # This is useful for constructing scripts which use the non-color-style
 # scheme, e.g., the oldlynx script.
 #
 # This should precede ASSUMED_COLOR settings.
 #DEFAULT_COLORS:true
 
 .h1 External Programs
 
 .h2 EXTERNAL
 # External application support.  This feature allows Lynx to pass a given
 # URL to an external program.  It was written for three reasons.
 #
 # 1) To overcome the deficiency	of Lynx_386 not supporting ftp and news.
 #    External programs can be used instead by passing the URL.
 #
 # 2) To allow for background	transfers in multitasking systems.
 #    I use wget for http and ftp transfers via the external command.
 #
 # 3) To allow for new URLs to be used through Lynx.
 #	  URLs can be made up such as mymail: to spawn desired applications
 #	  via the external command.
 #
 # Restrictions can be imposed using -restrictions=externals at the Lynx command
 # line.  This will disallow all EXTERNAL lines in lynx.cfg that have FALSE in
 # the 3rd field (not counting the name of the setting).  TRUE lines will still
 # function.
 #
 # The lynx.cfg line is as follows:
 #
 # EXTERNAL:<url>:<command> %s:<norestriction>:<allow_for_activate>[:environment]
 #
 # <url> Any given URL.  This can be normal ones like ftp or http or it
 # can be one made up like mymail.
 #
 # <command> The command to run with %s being the URL that will be passed.
 # In Linux I use "wget -q %s &" (no quotes) to spawn a copy of wget for
 # downloading http and ftp files in the background.  In Win95 I use
 # "start ncftp %s" to spawn ncftp in a new window.
 #
 # <norestriction> This complements the -restrictions=externals feature to allow
 # for certain externals to be enabled while restricting others.  TRUE means
 # a command will still function while Lynx is restricted.  WB
 #
 # <allow_for_activate> Setting this to TRUE allows the use of this command not
 # only when EXTERN key is pressed, but also when ACTIVATE command is invoked
 # (i.e., activating the link with the given prefix will be equivalent to
 # pressing EXTERN key on it).  If this component of the line is absent, then
 # FALSE is assumed.
 #
 # [:environment] Optional, if XWINDOWS then command is allowed only if
 # $DISPLAY environment variable is set, else if NON_XWINDOWS then command
 # is allowed only if $DISPLAY environment variable is not set, if absent or
 # anything else command is always allowed.
 #
 # For invoking the command use the EXTERN_LINK or EXTERN_PAGE key.  By default
 # EXTERN_LINK is mapped to '.', and EXTERN_PAGE to ',' (if the feature is
 # enabled), see the KEYMAP section above.
 #
 #EXTERNAL:ftp:wget %s &:TRUE
 
 .h2 EXTERNAL_MENU
 # Like EXTERNAL, but allows customizing the menu name.
 # Here is the syntax:
 .ex 1
 # EXTERNAL_MENU:<url>:<menu>:<command> %s:<norestriction>:<allow_for_activate>[:environment]
 
 .h1 Internal Behavior
 
 .h2 RULE
 .h2 RULESFILE
 # CERN-style rules, EXPERIMENTAL  -  URL-specific rules
 #
 # A CERN-style rules file can be given with RULESFILE.  Use the system's
 # native format for filenames, on Unix '~' is also recognized.  If a filename
 # is given, the file must exist.
 #
 # Single CERN-style rules can be specified with RULES.
 #
 # Both options can be repeated, rules accumulate in the order
 # given, they will be applied in first-to-last order.  See cernrules.txt
 # in the samples subdirectory for further explanation.
 #
 # Examples:
 .ex 5
 #	RULESFILE:/etc/lynx/cernrules
 #	RULE:Fail	gopher:*		     # reject by scheme
 #	RULE:Pass	finger://*@localhost/	     # allow this,
 #	RULE:Fail	finger:*		     # but not others
 #	RULE:Redirect	http://old.server/*	http://new.server/*
 
 .h1 Appearance
 
 .h2 PRETTYSRC
 # Enable pretty source view
 #PRETTYSRC:FALSE
 
 .h2 PRETTYSRC_SPEC
 # Pretty source view settings. These settings are in effect when -prettysrc
 # is specified.
 # The following lexical elements (lexemes) are recognized:
 # comment, tag, attribute, attribute value, generalized angle brackets (
 # '<' '>' '</' ), entity, hyperlink destination, entire file, bad sequence,
 # bad tag, bad attribute, sgml special.
 #  The following group of option tells which styles will surround each
 # lexeme. The syntax of option in this group is:
 #PRETTYSRC_SPEC:<LEXEMENAME>:<TAGSPEC>:<TAGSPEC>
 # The first <TAGSPEC> specifies what tags will precede lexemes of that class
 # in the internal html markup. The second - what will be placed (internally)
 # after it.
 # TAGSPEC has the following syntax:
 # <TAGSPEC>:= [ (<TAGOPEN> | <TAGCLOSE>) <SPACE>+ ]*
 # <TAGOPEN>:= tagname[.classname]
 # <TAGCLOSE>:= !tagname
 #
 # The following table gives correspondence between lexeme and lexeme name
 .nf
 # Lexeme                   LEXEMENAME  FURTHER EXPLANATION
 # =========================================================
 # comment                  COMM
 # tag                      TAG         recognized tag name only
 # attribute                ATTRIB
 # attribute value          ATTRVAL
 # generalized brackets     ABRACKET    <  >  </
 # entity                   ENTITY
 # hyperlink destination    HREF
 # entire file              ENTIRE
 # bad sequence             BADSEQ      bad entity or invalid construct at text
 #                                      level.
 # bad tag                  BADTAG      Unrecognized construct in generalized
 #                                      brackets.
 # bad attribute            BADATTR     The name of the attribute unknown to lynx
 #                                      of the tag known to lynx. (i.e.,
 #                                      attributes of unknown tags will have
 #                                      markup of  ATTRIB)
 # sgml special             SGMLSPECIAL doctype, sgmlelt, sgmlele,
 #                                      sgmlattlist, marked section, identifier
 .fi
 #
 # Notes:
 #
 # 1) The markup for HTML_ENTIRE will be emitted only once - it will surround
 #    entire file source.
 #
 # 2) The tagnames specified by TAGSPEC should be valid html tag names.
 #
 # 3) If the tag/class combination given by TAGOPEN is not assigned a color
 #    style in lss file (for lynx compiled with lss support), that tag/class
 #    combination will be emitted anyway during internal html markup. Such
 #    combinations will be also reported to the trace log.
 #
 # 4) Lexeme 'tag' means tag name only
 #
 # 5) Angle brackets of html specials won't be surrounded by markup for ABRACKET
 #
 .ex
 # PRETTYSRC_SPEC:COMM:B I:!I !B
 #           HTML comments will be surrounded by <b><i> and </i></b> in the
 #           internal html markup
 .ex
 # PRETTYSRC_SPEC:ATTRVAL: span.attrval : !span
 #           Values of the attributes will be surrounded by the
 #           <SPAN class=attrval> </SPAN>
 .ex
 # PRETTYSRC_SPEC:HREF::
 #           No special html markup will surround hyperlink destinations (
 #           this means that only default color style for hrefs will be applied
 #           to them)
 #
 # For lynx compiled with lss support, the following settings are the default:
 #PRETTYSRC_SPEC:COMM:span.htmlsrc_comment:!span
 #PRETTYSRC_SPEC:TAG:span.htmlsrc_tag:!span
 #PRETTYSRC_SPEC:ATTRIB:span.htmlsrc_attrib:!span
 #PRETTYSRC_SPEC:ATTRVAL:span.htmlsrc_attrval:!span
 #PRETTYSRC_SPEC:ABRACKET:span.htmlsrc_abracket:!span
 #PRETTYSRC_SPEC:ENTITY:span.htmlsrc_entity:!span
 #PRETTYSRC_SPEC:HREF:span.htmlsrc_href:!span
 #PRETTYSRC_SPEC:ENTIRE:span.htmlsrc_entire:!span
 #PRETTYSRC_SPEC:BADSEQ:span.htmlsrc_badseq:!span
 #PRETTYSRC_SPEC:BADTAG:span.htmlsrc_badtag:!span
 #PRETTYSRC_SPEC:BADATTR:span.htmlsrc_badattr:!span
 #PRETTYSRC_SPEC:SGMLSPECIAL:span.htmlsrc_sgmlspecial:!span
 # the styles corresponding to them are present in sample .lss file.
 # For lynx compiled without lss support, the following settings are the default:
 #PRETTYSRC_SPEC:COMM:b:!b
 #PRETTYSRC_SPEC:TAG:b:!b
 #PRETTYSRC_SPEC:ATTRIB:b:!b
 #PRETTYSRC_SPEC:ATTRVAL::
 #PRETTYSRC_SPEC:ABRACKET:b:!b
 #PRETTYSRC_SPEC:ENTITY:b:!b
 #PRETTYSRC_SPEC:HREF::
 #PRETTYSRC_SPEC:ENTIRE::
 #PRETTYSRC_SPEC:BADSEQ:b:!b
 #PRETTYSRC_SPEC:BADTAG::
 #PRETTYSRC_SPEC:BADATTR::
 #PRETTYSRC_SPEC:SGMLSPECIAL:b:!b
 
 .h2 HTMLSRC_ATTRNAME_XFORM
 .h2 HTMLSRC_TAGNAME_XFORM
 # Options HTMLSRC_TAGNAME_XFORM and HTMLSRC_ATTRNAME_XFORM control the way the
 # names of tags and names of attributes are transformed correspondingly.
 # Possible values: 0 - lowercase, 1 - leave as is, 2 - uppercase.
 #HTMLSRC_TAGNAME_XFORM:2
 #HTMLSRC_ATTRNAME_XFORM:2
 
 .h2 PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING
 # PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING - pretty source view setting
 # If "keypad mode" in 'O'ptions screen is "Links are numbered" or
 # "Links and form fields are numbered", and PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING is
 # TRUE, then links won't be numbered in psrc view and will be numbered
 # otherwise. Set this setting to TRUE if you prefer numbered links, but wish
 # to get valid HTML source when printing or mailing when in psrc view.
 # Default is FALSE.
 #PRETTYSRC_VIEW_NO_ANCHOR_NUMBERING:FALSE
 
 .h1 HTML Parsing
 
 .h2 FORCE_EMPTY_HREFLESS_A
 # FORCE_EMPTY_HREFLESS_A - HTML parsing
 # This option mirrors command-line option with the same name.  Default is
 # FALSE.  If true, then any 'A' element without HREF will be closed
 # immediately.  This is useful when viewing documentation produced by broken
 # translator that doesn't emit balanced A elements.  If lynx was compiled with
 # color styles, setting this option to TRUE will make lynx screen much more
 # reasonable (otherwise all text will probably have color corresponding to the
 # A element).
 #
 #FORCE_EMPTY_HREFLESS_A:FALSE
 
 .h2 HIDDEN_LINK_MARKER
 # HIDDEN_LINK_MARKER - HTML parsing
 # This option defines the string that will be used as title of hidden link (a
 # link that otherwise will have no label associated with it).  Using an empty
 # string as the value will cause lynx to behave in the old way - hidden links
 # will be handled according to other settings (mostly the parameter of
 # -hiddenlinks command-line switch).  If the value is non-empty string, hidden
 # link becomes non-hidden so it won't be handled as hidden link, e.g., listed
 # among hidden links on 'l'isting page.
 #
 #HIDDEN_LINK_MARKER:
 
 .h2 XHTML_PARSING
 # XHTML_PARSING - HTML parsing
 # When true, tells lynx that it can ignore certain tags which have no content
 # in an XHTML 1.0 document.  For example
 #	<p />
 #	<a />
 # When the option is false, lynx will not treat the tag as an ending.
 #XHTML_PARSING:FALSE
 
 .h1 Appearance
 
 .h2 JUSTIFY
 # JUSTIFY - Appearance
 # This option mirrors command-line option with same name.  Default is TRUE.  If
 # true, most of text (except headers and like this) will be justified.  This
 # has no influence on CJK text rendering.
 #
 # This option is only available if Lynx was compiled with USE_JUSTIFY_ELTS.
 #
 #JUSTIFY:FALSE
 
 .h2 JUSTIFY_MAX_VOID_PERCENT
 # JUSTIFY_MAX_VOID_PERCENT - Appearance
 # This option controls the maximum allowed value for ratio (in percents) of
 # 'the number of spaces to spread across the line to justify it' to
 # 'max line size for current style and nesting' when justification is allowed.
 # When that ratio exceeds the value specified, that particular line won't be
 # justified. I.e. the value 28 for this setting will mean maximum value for
 # that ratio is 0.28.
 #
 #JUSTIFY_MAX_VOID_PERCENT:35
 
 .h1 Interaction
 
 .h2 TEXTFIELDS_NEED_ACTIVATION
 # If TEXTFIELDS_NEED_ACTIVATION is set to TRUE, and lynx was compiled with
 # TEXTFIELDS_MAY_NEED_ACTIVATION defined, then text input form fields need
 # to be activated (by pressing the Enter key or similar) before the user
 # can enter or modify input.  By default, input fields become automatically
 # activated when selected.  Requiring explicit activation can be desired for
 # users who use alphanumeric keys for navigation (or other keys that have
 # special meaning in the line editor - ' ', 'b', INS, DEL, etc), and don't
 # want to 'get stuck' in form fields.  Instead of setting the option here,
 # explicit activation can also be requested with the -tna command line
 # option.
 #
 #TEXTFIELDS_NEED_ACTIVATION:FALSE
 
 .h2 LEFTARROW_IN_TEXTFIELD_PROMPT
 # LEFTARROW_IN_TEXTFIELD_PROMPT
 # This option controls what happens when a Left Arrow key is pressed while
 # in the first position of an active text input field.  By default, Lynx
 # asks for confirmation ("Do you want to go back to the previous document?")
 # only if the contents of the fields have been changed since entering it.
 # If set to TRUE, the confirmation prompt is always issued.
 #
 #LEFTARROW_IN_TEXTFIELD_PROMPT:FALSE
 
 .h1 Timeouts
 
 .h2 CONNECT_TIMEOUT
 # Specifies (in seconds) connect timeout. Default value is rather huge.
 #CONNECT_TIMEOUT:18000
 
 .h2 READ_TIMEOUT
 # Specifies (in seconds) read-timeout. Default value is rather huge.
 #READ_TIMEOUT:18000
 
 .h1 Internal Behavior
 # These settings control internal lynx behavior - the way it interacts with the
 # operating system and Internet.  Modifying these settings will not change
 # the rendition of documents that you browse with lynx, but can change various
 # delays and resource utilization.
 
 .h2 FTP_PASSIVE
 # Set FTP_PASSIVE to TRUE if you want to use passive mode ftp transfers.
 # You might have to do this if you're behind a restrictive firewall.
 #FTP_PASSIVE:TRUE
 
 .h2 ENABLE_LYNXRC
 # The forms-based O'ptions menu shows a (!) marker beside items which are not
 # saved to ~/.lynxrc -- the reason for disabling some of these items is that
 # they are likely to cause confusion if they are read from the .lynxrc file for
 # each session.  However, they can be enabled or disabled using the
 # ENABLE_LYNXRC settings.  The default (compiled-in) settings are shown below.
 # The second column is the name by which a setting is saved to .lynxrc (which
 # is chosen where possible to correspond with lynx.cfg).  Use "OFF" to disable
 # writing a setting, "ON" to enable it.  Settings are read from .lynxrc after
 # the corresponding data from lynx.cfg, so they override lynx.cfg, which is
 # probably what users expect.
 #
 # Note that a few settings (Cookies and Show images) are comprised of more than
 # one lynx.cfg setting.
 .nf
 #ENABLE_LYNXRC:ACCEPT_ALL_COOKIES:ON
 #ENABLE_LYNXRC:ASSUME_CHARSET:OFF
 #ENABLE_LYNXRC:AUTO_SESSION:OFF
 #ENABLE_LYNXRC:BOOKMARK_FILE:ON
 #ENABLE_LYNXRC:CASE_SENSITIVE_SEARCHING:ON
 #ENABLE_LYNXRC:CHARACTER_SET:ON
 #ENABLE_LYNXRC:COLLAPSE_BR_TAGS:ON
 #ENABLE_LYNXRC:COOKIE_ACCEPT_DOMAINS:ON
 #ENABLE_LYNXRC:COOKIE_FILE:ON
 #ENABLE_LYNXRC:COOKIE_LOOSE_INVALID_DOMAINS:ON
 #ENABLE_LYNXRC:COOKIE_QUERY_INVALID_DOMAINS:ON
 #ENABLE_LYNXRC:COOKIE_REJECT_DOMAINS:ON
 #ENABLE_LYNXRC:COOKIE_STRICT_INVALID_DOMAIN:ON
 #ENABLE_LYNXRC:DIR_LIST_STYLE:ON
 #ENABLE_LYNXRC:DISPLAY:OFF
 #ENABLE_LYNXRC:EMACS_KEYS:ON
 #ENABLE_LYNXRC:FILE_EDITOR:ON
 #ENABLE_LYNXRC:FILE_SORTING_METHOD:ON
 #ENABLE_LYNXRC:FORCE_COOKIE_PROMPT:OFF
 #ENABLE_LYNXRC:FORCE_SSL_PROMPT:OFF
 #ENABLE_LYNXRC:FTP_PASSIVE:OFF
 #ENABLE_LYNXRC:HTML5_CHARSETS:OFF
 #ENABLE_LYNXRC:HTTP_PROTOCOL:1.0
 #ENABLE_LYNXRC:KBLAYOUT:ON
 #ENABLE_LYNXRC:KEYPAD_MODE:ON
 #ENABLE_LYNXRC:LINEEDIT_MODE:ON
 #ENABLE_LYNXRC:LOCALE_CHARSET:ON
 #ENABLE_LYNXRC:MAKE_LINKS_FOR_ALL_IMAGES:OFF
 #ENABLE_LYNXRC:MAKE_PSEUDO_ALTS_FOR_INLINES:OFF
 #ENABLE_LYNXRC:MULTI_BOOKMARK:ON
 #ENABLE_LYNXRC:NO_PAUSE:OFF
 #ENABLE_LYNXRC:PERSONAL_MAIL_ADDRESS:ON
 #ENABLE_LYNXRC:PREFERRED_CHARSET:ON
 #ENABLE_LYNXRC:PREFERRED_ENCODING:OFF
 #ENABLE_LYNXRC:PREFERRED_LANGUAGE:ON
 #ENABLE_LYNXRC:PREFERRED_MEDIA_TYPES:OFF
 #ENABLE_LYNXRC:RAW_MODE:OFF
 #ENABLE_LYNXRC:RUN_ALL_EXECUTION_LINKS:ON
 #ENABLE_LYNXRC:RUN_EXECUTION_LINKS_LOCAL:ON
 #ENABLE_LYNXRC:SCROLLBAR:OFF
 #ENABLE_LYNXRC:SELECT_POPUPS:ON
 #ENABLE_LYNXRC:SEND_USERAGENT:OFF
 #ENABLE_LYNXRC:SESSION_FILE:OFF
 #ENABLE_LYNXRC:SET_COOKIES:OFF
 #ENABLE_LYNXRC:SHOW_COLOR:ON
 #ENABLE_LYNXRC:SHOW_CURSOR:ON
 #ENABLE_LYNXRC:SHOW_DOTFILES:ON
 #ENABLE_LYNXRC:SHOW_KB_RATE:OFF
 #ENABLE_LYNXRC:SUB_BOOKMARKS:ON
 #ENABLE_LYNXRC:TAGSOUP:OFF
 #ENABLE_LYNXRC:UNDERLINE_LINKS:OFF
 #ENABLE_LYNXRC:USER_MODE:ON
 #ENABLE_LYNXRC:USERAGENT:OFF
 #ENABLE_LYNXRC:VERBOSE_IMAGES:ON
 #ENABLE_LYNXRC:VI_KEYS:ON
 #ENABLE_LYNXRC:VISITED_LINKS:ON
 .fi
 
 .h1 External Programs
 # Any of the compiled-in pathnames of external programs can be overridden
 # by specifying the corresponding xxx_PATH variable.  If the variable is
 # given as an empty string, lynx will not use the program.  For a few cases,
 # there are internal functions which can be used instead.
 
 .h2 BZIP2_PATH
 # This is the path used for DIRED mode and web connections to compress a file
 # to ".bz2", e.g., the Unix command "bzip2".
 
 .h2 CHMOD_PATH
 # This is the path used for DIRED mode to change file protection, e.g., the
 # Unix command "chmod".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 COMPRESS_PATH
 # This is the path used for DIRED mode and web connections to compress a file
 # to ".Z", e.g., the Unix command "compress".
 
 .h2 COPY_PATH
 # This is the path used for DIRED mode to copy a file, e.g., the
 # Unix command "cp".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 GZIP_PATH
 # This is the path used for DIRED mode and web connections to compress a file
 # to ".gz", e.g., the Unix command "gzip".
 
 .h2 INFLATE_PATH
 # This is the path used for web connections to compress a file using "inflate"
 # compression.
 
 .h2 INSTALL_PATH
 # This is the path used for DIRED mode to install files, e.g., the
 # Unix command "install".
 
 .h2 MKDIR_PATH
 # This is the path used for DIRED mode to create a directory, e.g., the
 # Unix command "mkdir".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 MV_PATH
 # This is the path used for DIRED mode to move a file, e.g., the
 # Unix command "mv".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 RLOGIN_PATH
 # This is the path used for DIRED mode to login remotely, e.g., the
 # Unix command "rlogin".
 
 .h2 RMDIR_PATH
 # This is the path used for DIRED mode to remove a directory, e.g., the
 # Unix command "rmdir".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 RM_PATH
 # This is the path used for DIRED mode to remove a file, e.g., the
 # Unix command "rm".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 SETFONT_PATH
 # This is the path used for a command which can be used to load a console font
 # for the experimental font-switch feature, e.g., the program "setfont".
 
 .h2 TAR_PATH
 # This is the path used for DIRED mode to create a tar archive from one or more
 # files.
 
 .h2 TELNET_PATH
 # This is the path for a program which can be used to make a "telnet" connection
 # to a remote host.
 
 .h2 TN3270_PATH
 # This is the path for a program which can be used to make an "IBM 3270"
 # connection to a remote host.
 
 .h2 TOUCH_PATH
 # This is the path used for DIRED mode to update the modification time of a
 # file to the current time,, e.g., the Unix command "touch".
 #
 # Setting this to an empty string will let lynx use a built-in version.
 
 .h2 UNCOMPRESS_PATH
 # This is the path used for DIRED mode and web connections to decompress a file
 # with ".Z" suffix, e.g., the Unix command "uncompress".
 
 .h2 UNZIP_PATH
 # This is the path used for DIRED mode to extract files from a zip-archive the
 # program "unzip".
 
 .h2 UUDECODE_PATH
 # This is the path used for DIRED mode to extract files from uuencoded files
 # e.g., the program "uudecode".
 
 .h2 ZCAT_PATH
 # This is the path used for DIRED mode to decompress files, writing the result
 # to a pipe as part of a shell command, e.g., the program "zcat".
 
 .h2 ZIP_PATH
 # This is the path used for DIRED mode to create a zip-archive from one or more
 # files, e.g., the program "unzip".
 
 .h1 Interaction
 
 .h2 FORCE_SSL_PROMPT
 # If FORCE_SSL_PROMPT is set to "yes", then questionable conditions, such as
 # self-signed certificates will be ignored.  If set to "no", these will be
 # reported, but not attempted.  The default "prompt" permits the user to make
 # this choice on a case-by-case basis.
 #
 #FORCE_SSL_PROMPT:PROMPT
 
 .h2 FORCE_COOKIE_PROMPT
 # If FORCE_COOKIE_PROMPT is set to "yes", then questionable conditions, such as
 # cookies with invalid syntax will be ignored.  If set to "no", these will be
 # reported, but not attempted.  The default "prompt" permits the user to make
 # this choice on a case-by-case basis.
 #
 #FORCE_COOKIE_PROMPT:PROMPT
 
 .h2 SSL_CERT_FILE
 # Set SSL_CERT_FILE to the file that contains all valid CA certificates lynx
 # should accept, in case the $SSL_CERT_FILE environment variable is not set,
 # e.g.,
 #
 #SSL_CERT_FILE:/etc/ssl/certs/ca-certificates.crt
 #SSL_CERT_FILE:NULL
 
 .h2 SSL_CLIENT_CERT_FILE
 # Set SSL_CLIENT_CERT_FILE to the file that contains a client certificate
 # (in PEM format) in case the $SSL_CLIENT_CERT_FILE environment variable is
 # not set, e.g.,
 #
 #SSL_CLIENT_CERT_FILE:/home/qux/certs/cert.crt
 #SSL_CLIENT_CERT_FILE:NULL
 
 .h2 SSL_CLIENT_KEY_FILE
 # Set SSL_CLIENT_KEY_FILE to the file that contains a client certificate
 # key (in PEM format), in case the $SSL_CLIENT_KEY_FILE environment variable
 # is not set, e.g.,
 #
 #SSL_CLIENT_KEY_FILE:/home/qux/certs/cert.key
 #SSL_CLIENT_KEY_FILE:NULL
 
 .h1 Appearance
 
 .h2 SCREEN_SIZE
 # For win32, allow the console window to be resized to the given values.  This
 # requires PDCurses 2.5.  The values given are width,height.
 #SCREEN_SIZE:80,24
 
 .h2 NO_MARGINS
 # Disable left/right margins in the default style sheet.
 # This is the same as the command-line "-nomargins" option.
 #NO_MARGINS:FALSE
 
 .h2 NO_TITLE
 # Disable title and blank line from top of page.
 # This is the same as the command-line "-notitle" option.
 #NO_TITLE:FALSE
 
 .h1 External Programs
 
 .h2 SYSLOG_REQUESTED_URLS
 # Log the requested URLs using the syslog interface.
 #SYSLOG_REQUESTED_URLS:TRUE
 
 .h2 SYSLOG_TEXT
 # Add the given text to calls made to syslog, to distinguish Lynx from other
 # applications which use that interface.
 #SYSLOG_TEXT:
 
 .h1 Internal Behavior
 .h2 BROKEN_FTP_RETR
 # Some ftp servers are known to have a broken implementation of RETR.  If asked
 # to retrieve a directory, they get confused and fails subsequent commands such
 # as CWD and LIST.  Workaround: reconnect after a failed RETR, which is slow.
 #
 # Each BROKEN_FTP_RETR gives a string match for the reported FTP server version
 #BROKEN_FTP_RETR:ProFTPD 1.2.5
 #BROKEN_FTP_RETR:spftp/
 
 .h2 BROKEN_FTP_EPSV
 # Some ftp servers are known to have a broken implementation of EPSV.  The
 # server will hang for a long time when we attempt to connect after issuing
 # this command.   Workaround: do not use EPSV, just use PASV.
 #
 # Each BROKEN_FTP_EPSV gives a string match for the reported FTP server version
 #BROKEN_FTP_EPSV:(Version wu-2.6.2-12)
 
 .h1 Appearance
 .h2 FTP_FORMAT
 # FTP_FORMAT defines the display for remote files.
 # It uses the same "%" codes as LIST_FORMAT.
 #FTP_FORMAT:%d  %-16.16t %a  %K
 
 .h1 Internal Behavior
 
 .h2 STATUS_BUFFER_SIZE
 # STATUS_BUFFER_SIZE controls the size of the buffer used for the LYNXMESSAGES
 # special url.
 #
 # The default size is 40.
 #STATUS_BUFFER_SIZE:40
 
 .h2 MAX_URI_SIZE
 # MAX_URI_SIZE controls the size of the buffer used for parsing URIs, e.g., the
 # HREF value in an anchor.
 #
 # The default size is 8192.
 #MAX_URI_SIZE:8192
 
 .h1 Appearance
 .h2 UNIQUE_URLS
 # UNIQUE_URLS can be set to tell Lynx to check for duplicate link numbers in
 # the page and corresponding lists, and reusing the original link number.
 # This can be set via command-line "-unique-urls".
 #UNIQUE_URLS:FALSE
 
 .h1 Character Sets
 .h2 MESSAGE_LANGUAGE
 # MESSAGE_LANGUAGE can be set to set the LANG environment variable explicitly.
 # This is mainly useful in non-Unix environments, e.g., Windows, since normally
 # LC_ALL is set, overriding LANG (as well as the more apt LC_MESSAGES variable).
 #MESSAGE_LANGUAGE:
 
 .h2 CONV_JISX0201KANA
 # If CONV_JISX0201KANA is set, Lynx will convert JIS X0201 Kana to JIS X0208
 # Kana, i.e., convert half-width kana to full-width.
 #CONV_JISX0201KANA:TRUE
 
 .h1 External Programs
 .h2 WAIT_VIEWER_TERMINATION
 # The WAIT_VIEWER_TERMINATION is used in the Windows environment to tell Lynx
 # to wait until a viewer has terminated.
 #WAIT_VIEWER_TERMINATION:FALSE
 
 .h1 Mail-related
 .h2 BLAT_MAIL
 # BLAT_MAIL is used in the Win32 port.  It tells Lynx whether to use the
 # "blat" mailer, or the "sendmail" utility.  Normally the "blat" mailer is
 # used for Win32, because the sendmail look-alikes have fewer features.
 # This feature can also be set/reset via the command-line "-noblat" option.
 #
 # Blat is available from
 .url http://www.blat.net
 #
 # See also ALT_BLAT_MAIL and SYSTEM_MAIL flags.
 #BLAT_MAIL:TRUE
 
 .h2 ALT_BLAT_MAIL
 # BLAT_MAIL is used in the Win32 port.  It tells Lynx whether to use the
 # "blat" mailer, or the "blatj" utility.  This feature can also be set/reset
 # via the command-line "-altblat" option.
 #
 # Some users prefer blatj, which can handle Japanese characters.  It is
 # available from
 .url http://www.piedey.co.jp/blatj/
 # (caution - the page is in Japanese).
 #
 # See also BLAT_MAIL and SYSTEM_MAIL flags.
 #ALT_BLAT_MAIL:FALSE
 
 .h1 Internal Behavior
 .h2 TRACK_INTERNAL_LINKS
 # With `internal links' (links within a document to a location within the same
 # document) enabled, Lynx will distinguish between, for example, `<A
 # HREF="foo#frag">' and `<A HREF="#frag">' within a document whose URL is
 # `foo'.  It may handle such links differently, although practical differences
 # would appear only if the document containing them resulted from a POST
 # request or had a no-cache flag set.  This feature attempts to interpret
 # URL-references as suggested by RFC 2396, and to prevent mistaken
 # resubmissions of form content with the POST method.  An alternate opinion
 # asserts that the feature could actually result in inappropriate resubmission
 # of form content.
 #TRACK_INTERNAL_LINKS:FALSE
 
 .h1 HTML Parsing
 
 .h2 DONT_WRAP_PRE
 # Inhibit wrapping of text when  -dump'ing  and  -crawl'ing,  mark
 # wrapped lines of <pre> in interactive session.
 #DONT_WRAP_PRE:FALSE
 
 .h2 FORCE_HTML
 # When true, this forces the first document specified on the command-line
 # to be interpreted as HTML.
 #FORCE_HTML:FALSE
 
 .h2 HIDDENLINKS
 # Control the display of hidden links, using one of the following names:
 #
 # MERGE
 #  hidden links show up as bracketed numbers  and  are  numbered
 #  together with other links in the sequence of their occurrence
 #  in the document.
 #
 # LISTONLY
 #  hidden links are shown only on  L)ist  screens  and  listings
 #  generated  by  -dump  or  from  the  P)rint  menu, but appear
 #  separately at the end of those lists.  This  is  the  default
 #  behavior.
 #
 # IGNORE
 #  hidden links do not appear even in listings.
 #
 #HIDDENLINKS:LISTONLY
 
 .h1 Appearance
 .h2 SHORT_URL
 # If true, show very long URLs in the status line with "..." to represent the
 # portion which cannot be displayed.  The beginning and end of the URL are
 # displayed, rather than suppressing the end.
 #SHORT_URL:FALSE
 
 .h1 Dump/Crawl
 .h2 LISTONLY
 # For -dump, show only the list of links.
 #LISTONLY:FALSE
 
 .h2 LIST_INLINE
 # For -dump, show the links inline with the text.
 #LIST_INLINE:FALSE
 
 .h2 LOCALHOST
 # When true, this disables URLs that point to remote hosts.
 #LOCALHOST:FALSE
 
 .h2 WITH_BACKSPACES
 # Emit backspaces in output if -dump'ing or -crawl'ing (like 'man' does).
 #WITH_BACKSPACES:FALSE
 
 .h1 Internal Behavior
 .h2 HTTP_PROTOCOL
 # Normally Lynx negotiates HTTP/1.0, because it does not support chunked
 # transfer (a requirement for all HTTP/1.1 clients), although it supports
 # several other features of HTTP/1.1.  You may encounter a server which does
 # not support HTTP/1.0 which can be used by switching to the later protocol.
 #HTTP_PROTOCOL:1.0
 
 .h2 GUESS_SCHEME
 # When true, Lynx may fill in a missing "scheme" for URIs which you provide.
 # This is different from URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES.
 #
 # If no "scheme" (such as "http:", "ftp:") is given in a URI, Lynx first checks
 # if there is a corresponding local file which can be accessed directly. 
 # Failing that, Lynx may inspect the URI to see if it begins with a prefix
 # which implies a scheme.
 #
 # Lynx uses these schemes for the corresponding prefixes:
 #
 # cso:
 #  "cso."
 #  "ns."
 #  "ph."
 # ftp:
 #  "ftp."
 # gopher:
 #  "gopher."
 # http:
 #  "www".
 # news:
 #   "news."
 # nntp:
 #   "nntp."
 # wais:
 #  "wais."
 #
 # The default value FALSE disables this guess, telling Lynx to just assume that
 # "http:" was intended.
 #GUESS_SCHEME:FALSE